Products

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

CYMEL® MB-98 resin is a butylated melamine crosslinker with high degree of alkylation and very low free formaldehyde. It has been specially designed to improve the resistance properties of urea-based acid curing wood coating formulations.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

CYMEL® UI-21-E Resin is a partially iso-butylated urea resin supplied in ethanol. It has been designed for a wide range of high build, low odor industrial wood finishes. CYMEL® UI-21-E Resin is not suitable for exterior applications.

CYMEL® U-663 resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties combined with very good block resistance makes CYMEL® U-663 resin suitable for acid curing wood coating applications where low formaldehyde emission and high film gloss is required.

CYMEL® UM-15 resin is a highly methylated urea crosslinker supplied as a liquid at >96% solids. Its high solids combined with very fast cure makes CYMEL® UM-15 resin suitable in high solids, low temperature curing systems, like wood and paper coatings. CYMEL® UM-15 is hydrophilic in nature, completely water soluble, and has very good compatibility with water soluble anionic backbone polymers. This makes CYMEL® UM-15 resin suitable for waterborne applications, like paper and wood coatings, where speed of cure is very important.

CYMEL® MB-94 resin is an n-butylated melamine crosslinker with a high degree of alkylation and very low free formaldehyde. CYMEL® MB-94 resin is designed for use in combination with urea resins for acid curing wood finishes to improve chemical resistance and cold check properties while maintaining fast drying properties.

CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes CYMEL® UB-30-B resin suitable for a wide range of industrial baking applications.

CYMEL® U-662 resin is a partially iso-butylated urea crosslinker supplied in a mixture of iso-butanol and xylene. CYMEL® U-662 resin has high reactivity and a high tendency for self-condensation providing fast drying films with good gloss, hardness and block resistance. CYMEL® U-662 resin is an excellent crosslinker for acid curing wood coating applications where low formaldehyde emission is required.

CYMEL® UI-27-EI Resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. CYMEL® UI-27-EI Resin is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. CYMEL® UI-27-EI Resin is not suitable for exterior applications.

CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea resins, CYMEL® UI-38-I is not recommended for exterior applications.