Products

ZHENGDA® ZD-1400 Polyether amine(also called Amine-terminated Polyether) is characterized by repeating oxypropylene units in the backbone. As shown by the representative structure, ZHENGDA® ZD-1400 Amine-terminated Polyether is a difunctional, primary amine with average molecular weight of about 4000. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains.

CYMEL® 1125 resin is a highly methylated/ethylated, carboxyl-modified benzoguanamine crosslinker supplied in 2-butoxy ethanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and detergent resistance. The structure of CYMEL® 1125 resin offers superior adhesion to metal substrates. CYMEL® 1125 resin can be used in a wide range of general purpose industrial finishes. However, because CYMEL® 1125 resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc, it is recommended for use in only dark single coat applications or primers, and not in pastel colors. Benzoguanamine resins have poor resistance to UV light, hence CYMEL® 1125 is not suitable for exterior applications

CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximised when activation was performed at high temperatures.

AP 5685 is low viscosity, modified aliphatic amine adduct hardener for epoxy resins based lacquers coatings.

ADDID® 230 is a solvent-free anti-static additive used to increase the conductivity of coating formulations.

AP 6004 is a 80% solids, light color, low viscosity Modified phenalkamine curing agent suitable for high solids epoxy coating applications. This curing agent offers advanced performance such as fast and low temperature cure, good dry color stability, and extended overcoat window in addition to excellent water resistance, adhesion, flexibility, and appearance at high humidity.

CRAYVALLAC® LV is a high performance, micronised amide wax rheology modifier suitable for very high-solids and solvent-free applications.CRAYVALLAC® LV overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body. Consequently, coatings formulated using CRAYVALLAC® LV exhibit an enhanced performance such as controlled flow behavior, ease of application and excellent sag resistance. Its very high efficiency even when activated allows to reach very strong shear thinning that can result either in very high sag resistance or interresting balance between viscosity and sag resistance. Therefore CRAYVALLAC® LV is for instance highly recommended in the case of solvent free coatings with relatively low viscosity. It prevents the use of specific equipment for the application that are necessary with more viscous solvent-free coatings.

CYMEL® U-21-510 Resin is a partially n-butylated urea resin supplied in a mixture of n-butanol and xylene. It has excellent compatibility with epoxy resins. It is recommended in primer formulations which are to be topcoated and re-baked. Low viscosity and epoxy solution compatibility make this product an ideal modifier.

D.E.R.® 324 is formulation for a high solids epoxy coating which may be applied with a roller over a properly pre-treated concrete surface. D.E.R.® 324 or d.E.R.® 353 epoxy resin can be used for the roller coating with similar performance.

AEROSIL® R 805 Coating is a fumed silica after-treated with organosilane. It providesutmost transparency.

D.E.H.® 24 Epoxy Curing Agent is an economical liquid aliphatic polyamine hardener, triethylenetetraamine (TETA), that offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Similar to D.E.H.® 20 Epoxy Curing Agent, it provides lower vapor hazard to workers due to its higher boiling point. D.E.H.® 24 Epoxy Curing Agent is used for maintenance paints, the manufacture of epoxy-amine adducts, in adhesives, and civil engineering applications. It is also used as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 24 Epoxy Curing Agent is used for casting, potting and encapsulation.

D.E.H.® 505 Epoxy Curing Agent is a modified aliphatic amine hardener used as a curing agent for epoxy resins.

Wayncor™ 229 is an effective multi-component, multi-phase synergistic corrosion inhibitor pigment. It is a chrome free product, and is compatible with all commercially available aqueous and solvent based resin systems. The recommended loading levels for water based systems and solvent based systems from 3 - 7% total formula weight.

D.E.H.® 4042 Epoxy Curing Agent is a modified cycloaliphatic polyamine based curing agent for epoxy resins, with a very long potlife.

D.E.H.® 630 is a modified cycloaliphatic amine epoxy curing agent.