Products

Dynasylan® 1124 is a secondary aminofunctional methoxy- silane possessing two symmetric silicon atoms. Dynasylan® 1124 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used, for the chemical modification of substances. Dynasylan® 1124 is a colorless to yellow liquid with an amine-like odor, which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane possessing two symmetric silicone atoms. Dynasylan® 1122 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used for the chemical modification of substances. Dynasylan® 1122 is a colorless to yellow liquid with an amine- like odor which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

TEGO® AddBond LTW-B improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.

SILIKOFTAL® HTL 1 is a ethoxy-functional siliconepolyester resin

TEGO® AddBond 2220 improves flexibility and adhesion of solvent borne coatings. This soft polyester shows very good compatibility in non-polar formulations.

SILIKOFTAL® HTL 3/MPA is a methoxy-functional siliconepolyester resin.

Bluesil™ SLT 10T is a one-component, odorless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. Bluesil™ SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures.

Additin® RC 3662 is a tricresyl phosphate for reduction of friction and wear in applications where high loads cause boundary lubrication conditions. Used in high performance fluids including mineral oil and synthetic base fluids and more difficult base fluids such as polyalphaolefins. Triaryl phosphates of this type are widely known as effective ashless antiwear and mild extreme pressure additives for lubricants and functional fluids.

Dynasylan® SIVO 110 is a multifunctional, basically VOC­ free, water­borne sol­gel system. It is composed of organofunctional silanes and functionalized, nanoscale SiO2 particles. Dynasylan® SIVO 110 is an opaque to milky, colorless to slightly yellow, low viscous liquid. Dynasylan® SIVO 110 can be diluted in water and a variety of common organic solvents. Besides reactive silanol groups it also contains organic functionalities based on Si­bonded epoxy groups.