Products

EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combination with an excellent water resistance.

Polycin® 12 is a 100% solids castor oil based reactive diluent having good compatibility and wetting. This polyol is a tetrahydroxy ester, with primary and secondary hydroxyl groups, making it an attractive material for chemical reactions.

Paricin® 220 is N-(2-hydroxyethyl)-12-hydroxy- stearamide. It is a high melting point wax like material that has broad compatibility with natural and synthetic waxes, resins and polymers to provide excellent slip and lubricating properties.

Thetawet™ FS-8020EB is an anionic surfactant and wetting agent used in fiber finishes, floor coatings, lacquers, and top coats. It is also used as a polish in industrial additives.

EBECRYL® 265 functions as a binder and resin in CASE ingredients. It offers abrasion resistance, excellent adhesion, improved flexibility, outdoor durability, and yellowing resistance. It is a non-yellowing grade.

BONDINE® TX8030 is a random ethylene-ethyl acrylate-maleic anhydride terpolymer.

EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

EBECRYL® 811 is an ultraviolet light (UV) or electron beam (EB) curable polyester acrylate for either wet or dry offset printing on plastic substrates. Inks made using EBECRYL® 811 obtain excellent adhesion to calendered vinyl, polystyrene, polyolefins, polycarbonate and PVC. The water balance of this product allows inks based upon it to be run on press with low amounts of fountain solution: a key parameter for printing on non-absorbent substrates.

RHOPLEX® WL-51 is ideal for high-performance waterborne finishes for coating plastic substrates, such as those used for business machines and office equipment. RHOPLEX® WL-51 is recommended for use on the following plastics: acrylonitrile/butadiene/styrene, polycarbonate, polyphenylene oxide, polyvinyl chloride, acrylic, polystyrene, high-impact polystyrene, polypropylene, and pre-treated thermoplastic polyolefin. RHOPLEX® WL-51 delivers an outstanding combination of application, durability, and appearance benefits that make it an excellent choice for demanding business and office applications.

PARALOID™ B-44S 40% Resin is specified for PVDF coil coatings and can be blended with other PARALOIDTM resins to adjust the balance of properties required for a particular application, such as color/base coats for metal substrates. It is supplied as a 40% solution in toluene and is also available in a solid grade (PARALOIDTM B-44 Solid Grade Thermoplastic Acrylic Resin).

PARALOID™ A-21 30% Resin is a very hard methyl methacrylate type polymer with enhanced adhesion properties. It is provided as a 30% solution in a toluene/butanol system. The polymer is also available in a solid grade form. Lacquers formulated with PARALOID™ A-21 30% Resin possess excellent intercoat adhesion, hardness, and outdoor durability. PARALOID™ A-21 30% Resin will air-dry rapidly to give clear, colorless films that have excellent resistance to yellowing.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.

Preventol® CMK 40 is a biocide used in building and construction, fluids and lubricants, industrial applications, and industrial and assembly adhesives.

PARALOID™ A-101 is a very hard methyl methacrylate polymer resin is recommended for clear coatings on vinyl, metal, and wood; gravure printing inks; plastisol primers; and barrier coatings for plastic. PARALOID A-101 has excellent adhesion to plastic; is fast drying; has excellent durability; and is highly resistant to water, grease, salt spray, and gasoline.