Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Monomer
- Product Code
- MITM15211
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL®® MPDDA is characterized by:
- Very low viscosity
- Good oligomer diluent
- Light color
UV/EB cured products based on EBECRYL®® MPDDA are characterized by the following performance properties:
- Excellent weathering
- Good cure response at low cross-link density
- Good adhesion
- Good water resistance
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Product Applications
EBECRYL®® MPDDA finds application in UV/EB cured inks and coatings systems. EBECRYL®® MPDDA is especially useful in applications where improved adhesion (particularly to plastics), improved elasticity or weathering, are desired.
Properties
- Physical Form
Technical Details & Test Data
- Viscosity Reduction
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for more than 2 years.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Colorless to yellow
- Odor (SDS)
- Ester acrylate
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 0.4 mg KOH/g mg KOH/g - Optical Properties
Value Units Test Method / Conditions Color Scale max. 100.0 APHA APHA - Physical Properties
Value Units Test Method / Conditions Density 1.009 g/cm³ g/cm³ Storage Temperature 39.0-104.0 °F °F Viscosity 4.0-8.0 - At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 288.0 °C °C Density (SDS) 1.03 g/cm³ g/cm³ at 20°C Flash Point (SDS) 141.0 °C °C Melting Point (SDS) -17.4 °C °C Partition coefficient n-octanol/water (SDS) 2.76 - n-octanol/water Solubility In Water (SDS) 541.0 mg/L mg/L at 20°C Vapor Pressure (SDS) 0.105 - at 20°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 -