Products

D.E.H.® 534 cycloaliphatic amine hardener is used as a curing agent for epoxy resins for rapid set and low temperature cure systems with high gloss and strength. It imparts very rapid development of properties and results in a blush-free product with good water spot resistance and very good chemical resistance. It can also be used as an accelerator for other hardeners in coatings and civil engineering applications.

AEROSIL® R 208 is a fumed silica after-treated with polydimethylsiloxane.

Exolit® OP 945 is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 um. The product is not hygroscopic and it is insoluble in water an common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 945 can easily be dispersed in solvents like acetone or MEK.

DLVE™ 52 is a low viscosity epoxy resin that facilitates high solids coating formulations with low volatile organic compound (VOC) emissions, while minimizing compromises in performance. DLVE™ 52 be cured using multiple types of curing agents.

Bluesil™ SP 3307 is a polyether modified polysiloxane.

AddWorks® IBC 760 is a mixture of a UV absorber, hindered amine light stabilizer (HALS) and antioxidant without any hazard labeling and designed to provide outstanding performance in SMP sealants in terms of light and heat stabilization. Available in micronized powder form, AddWorks® IBC 760 prolongs the service life of SMP sealants as it reduces cracking and yellowing that typically occurs if exposed to strong sunlight or high temperature conditions. The performance is evident when tested against current benzotriazole containing solutions in the market. Our new stabilizer solution is an ideal ingredient to formulate high performance SMP sealants used for construction, automotive and other outdoor applications.

CEAMLACTA DB 91-723 F is a carrageenan based product, standardized to obtain a uniform performance. Carrageenan is a natural hydrocolloid extracted from red seaweed of the Rhodophyceae class.

HIKOREZ® A-1100 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. And this grade also can be use as the binder for hot melt road marking.

TEGO® Flow 370 is a silicone-freeacrylicleveling agent and shows excellent compabilityand flow promotion with additionaldefoaming properties. It ishighlyrecommended for solventbornecoatings especiallyfor clear coatings.

WANAMINE™ H12MDA is a cycloaliphatic amine used as a curing agent in case ingredients and plastics and elastomers.

MULTIWAX® ML-445 is a microcrystalline wax composed of paraffin and hydrocarbon waxes. It is used in fluids and lubricants, food and nutrition, healthcare and pharma, industrial, and personal care markets.

Dynasylan® VPS 4721 is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows VPS 4721 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® VPS 4721 is a colorless liquid. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.