Products

Focus Base PS 12 is a cost effective, soluble oil emulsifier base package designed for use in both naphthenic and paraffinic oils. It can be used to formulate both soluble oils and semi-synthetic metalworking fluids. Focus Base PS 12 is formulated with a sodium sulfonate/succinic anhydride primary emulsion system and gives improved hard water stability and good rust protection with cleanliness. It assists in the prevention of soap and sludge build-up in sumps, reducing corrosion and microbiological problems. Focus Base PS12 does not contain chlorine, free sulfur, nitrites, phenols or heavy metals.

Focus Base P 60 is a soluble oil emulsifier package, free of tall oil and its derivatives, that has been designed for use in naphthenic oil. Focus Base P 60 is formulated with a primary emulsion system consisting of succinic anhydride in place of natural and synthetic sodium sulfonate. This product also features high alkalinity for pH stability and excellent hard water stability.

Focus Ester OE 1505 is specially designed to use in water-dilutable metalworking coolants. Focus Ester OE 1505 will provide lubrication and corrosion protection with outstanding wetting characteristics. Using Focus Ester OE 1505 will reduce or eliminate the amount of additives needed in metalworking coolants, like chlorine, fatty acids and amides. Focus Ester OE 1505 does not contain any phosphorus, chlorine or sulfur and is ashless.

Focus Base PS 36 is a soluble oil emulsifier package, free of tall oil and its derivatives, that has been designed for use in both naphthenic and paraffinic oils. Focus Base PS 36 is formulated with a primary emulsion system consisting of both sodium sulfonate and succinic anhydride—which gives improved performance in hard water stability and good rust protection with cleanliness. Focus Base PS 36 also features high free alkalinity which boosts rust protection and increases bacterial control, and lower viscosity than competitive fluids making it easier to handle. Focus Base PS 36 does not contain chlorine, free sulfur, nitrites, phenols, or heavy metals—all while being free of tall oil and its derivatives. Focus Base PS 36 was formulated to perform well at low temperatures with special focus on the bloom properties of this fluid as well as freeze-thaw stability.

MARLOX® RT 45 is a Fatty alcohol polyalkylen glycol ether

Focus Disperse P-1000-70P are polyisobutylene succinic anhydride (PIBSA), produced from 950 molecular weight polyisobutylene. They are produced via the thermal process, have no residual chlorine and are soluble in both paraffinic and naphthenic oils.

Focus Ester PA 117 is a unique synthetic polymerized ester designed to boost performance and enhance finish in severe metalworking applications. Focus Ester PA 117 is oil-soluble, but can be used to make high performance soluble oil and semi-synthetic machining coolants as well as drawing and stamping fluids. Focus Ester PA 117 has a molecular weight that gives it a perfect structure to replace chlorinated paraffins. Hydrophobic moieties have been incorporated into the polymeric ester to improve its solubility properties in higher refined paraffinic oils. Focus Ester PA 117 is a branched-chain fatty acid, which offers the highest level of thermal and hydrolytic properties. Also, it is expected to be less susceptible to bacterial attack than conventional fatty esters. In addition to replacing chlorine, Focus Ester PA 117 can be used to replace or reduce treat levels of all boundary and EP additives, like phosphorous, sulfur, lard oil, blown oil and other fatty friction modifiers.

MARLOX® RT 42 is one of the many low-foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi-linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 42 is a clear to slightly turbid liquid at room temperature and essentially 100% active.

Focus Base 10 is a soluble oil emulsifier package designed to emulsify naphthenic oils with aniline points between 160°F and 180°F. Higher treat levels with Focus Base 10 provide greater emulsification and rust protection under more demanding conditions. Focus Base 10 provides good emulsion stability in both soft and hard waters. This product is compatible with extreme pressure additives such as chlorinated paraffins, sulfurized products and esters used to formulate heavy duty soluble oils. Focus Base 10 does not contain chlorine, free sulfur, nitrites, phenols or heavy metals.

MARLOWET® LVS is castor oil ethoxylated dioleate

Focus DISPerse P-1000 is a polyisobutylene succinic anhydride (PIBSA), produced from 950 molecular weight polyisobutylene. They are produced via the thermal process, have no residual chlorine, and are soluble in both paraffinic and naphthenic oils.

Focus RP 30 is a water-soluble, oil-dispersible succinic ester/boron complex. Focus RP 30 is a water-soluble, oil-dispersible succinic ester/boron complex. Focus RP 30 is a water-soluble, oil-dispersible succinic ester/boron complex.

LIALET 125-9 is a fatty alcohol polyethyleneglycol ether, based on LIAL 125 and ethylene oxide (about 9 moles). It is manufactured in Terranova dei Passerini (LO) plant.

Focus Base 422 is a premium oil-soluble emulsifier package. It can be used to emulsify hydro-treated base oils like Group I and Group II oils. It is sodium sulfonate-free with a unique surfactant system. This base provides hard water- stable emulsions with excellent corrosion protection.

MARLOX® FK 64 is a fatty alcohol polyethylene glycol polypropylene glycol ether