Products

TERSPERSE® 4894 is a nonionic wetter and dispersant package for use in agricultural suspension concentrate formulations. TERSPERSE® 4894, which is a clear, straw-colored viscous liquid at room temperature, is soluble in water.

ZINC STEARATE RSN 131 HS GRANULAR CODE 8512 is a high bulk density, free-flowing granular powder.

Hatcol® 3812 is aN advanced high-stability polyol esters.Hatcol® 3812 was developed to provide clean lubrication in high temperature environments, especially where lubricant deposits or coking residues are a problem. It contains antioxidants, anti-wear, and anticorrosion additives selected and balanced for optimum performance in a polyol ester lubricant.

Elevast™ D50 are specialty hydrocarbon fluids designed to enhance the performance and processability of a broad range of polymer systems and applications. Elevast efficiently lowers Tg of polyolefins with carefully designed liquid polymer, with minimal change in crystalline properties and without requiring exquisite morphology control.

Bayferrox® 105 M is a single-ingredient inorganic pigment, classified as Pigment Red 101. This iron oxide pigment is commonly used in various applications, providing strong, stable color.

Bayferrox® 140 M is a single-ingredient inorganic pigment, specifically Pigment Red 101, made from iron(III) oxide. It is utilized for applications that require stable and reliable coloring properties.

D.E.H.® 488L is a modified cycloaliphatic polyamine curing agent with long pot life. No phenol or nonylphenol were used in the manufacture of this material. It has high reactivity, low viscosity and good acid and chemical resistance. Epoxy resin systems cured with D.E.H.® 488L at temperatures above 10 C show an outstanding early water resistance.

Solumer™ 871L is an ethylene-octene copolymer produced via Nexlene™ technology. It performs well in a wide range of general purpose thermoplastic elastomer applications and has excellent flow characteristics.

3M™ Ceramic Microspheres W-410 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

D.E.H.® 612 is a modified aliphatic amine hardener produced without the use of nonylphenol. It is used as an epoxy curing agent for rapid-set and low temperature cure systems and provides high gloss coatings with good blush resistance, high strength, and good chemical resistance. It can be used alone or as an accelerator for other amines.

3M™ Ceramic Microspheres W-610 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

D.E.H.® 7009 is a modified polyamine suitable for solvent free primers. It is free of benzyl alcohol, nonylphenol and bisphenol A. It has also a low viscosity and long pot life.