Enhanced TDS
Identification & Functionality
- Blend
- No
- CI Name
- CI Number
- Chemical Family
- Pigment Type
- Product Code
- MITM07159
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
Properties
- Physical Form
- Notes
- * - Minor elements may arise from the raw materials used. However, these are firmly bound to the crystal lattice as ions.
- ¹ - similar to wet system DIN 55983:1983
- ² - Color values after matching of the tinting strength parameter Y, i.e. Δ L*=0
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
Protect against weathering. Store in a dry place and avoid extreme fluctuations in temperature. Close bags after use to prevent the absorption of moisture and contamination. If stored under the correct conditions (no climatic influence, kept dry and no extreme fluctuations in temperature) Bayferrox® 140 M have an excellent shelf life. However, due primarily to the limited durability of the packaging, we recommend that the product is used within 5 years of the date of manufacture and our product warranty is limited to this period. During the first five years after the date of manufacture we are able to ensure compliance with our specification, provided the material has been stored correctly and the packaging materials remain undamaged.
Other
- Appearance
- Red pigment powder
- Appearance (SDS)
- Powder
- Color (SDS)
- Red
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Difference max. 1.0 - Delta E, Binder: Full Shade Color Difference max. 0.8 - Delta E, Titanium dioxide reduction (1:5) Color Intensity 97.0-103.0 % % Color Scale -0.8-0.8 CIELAB CIELAB Delta a, Binder, Full shade Color Scale -0.5-0.5 CIELAB CIELAB Delta a, Test paste based on a non drying alkyd resin, Reduction with titanium dioxide Tronox® R-KB-2 (1 : 5) Color Scale -0.9-0.9 CIELAB CIELAB Delta b, Binder: Full shade Color Scale -0.5-0.5 CIELAB CIELAB Delta b, Binder: reduction with titanium dioxide tronox® R-KB-2 (1 : 5) Color Scale -0.8-0.8 CIELAB CIELAB Delta C, Binder: Full shade Color Scale -0.6-0.6 CIELAB CIELAB Delta C, Binder: Reduction with titanium dioxide (1 : 5) Color Scale -0.8-0.8 CIELAB CIELAB delta H, binder: full shade Color Scale -0.6-0.6 CIELAB CIELAB Delta H, Binder: Reduction with Titanium dioxide (1:5) Color Scale -0.4-0.4 CIELAB CIELAB delta L, binder, full shade - Chemical Properties
Value Units Test Method / Conditions Loss on Ignition max. 1.0 % % DIN 55913 at 1000°C, 0.5h pH 5.0-8.0 - DIN 53195 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life1 5.0 yr yr - Physical Properties
Value Units Test Method / Conditions Apparent Tamped Density 1.1-1.5 g/mL g/mL DIN EN ISO 787-11 Density 5.0 g/mL g/mL DIN EN ISO 787-10 Moisture Content max. 0.5 % % DIN EN ISO 787-2 Oil Absorption 18.0 g/100g g/100g DIN EN ISO 787-5 Particle Size 0.2 µm µm Scanning Electron Microscopy (SEM) Sieve Fractionation (Retained) max. 0.002 % % DIN EN ISO 787-3 0.045 mm Water Solubles max. 0.4 % % DIN EN ISO 787-3 - Material Composition
Value Units Test Method / Conditions Iron Concentration min. 94.2 % % α - Iron(III) Oxide Content - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 5.0 g/cm³ g/cm³ at 20°C Melting Point (SDS) min. 1832.0 °F °F pH (SDS) 5.0-8.0 - 5% Concentration