Products

EBECRYL® 3703 is an amine modified bisphenol A epoxy diacrylate that exhibits exceptionally fast cure via exposure to ultraviolet light (UV). Films of EBECRYL® 3703 cured by UV or electron beam (EB) demonstrate good flexibility, high gloss and excellent chemical resistance. The amine modification can also improve adhesion to plastics.

TEGO® Foamex 842 is an effective defoamer solution based on polyether siloxane technology. Contains no fumed silica. Suitable for pigmented and clear formulations.

TEGO® Rad 2700 is a radically cross-linkable release additive, providing utmost release and slip properties. Additional defoaming properties. Ideal for high-viscosity pigmented inks.

SUKOREZ® SU-110 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

EBECRYL® 83 is an amine modified polyether acrylate that exhibits low viscosity and fast cure via exposure to ultraviolet light (UV). Films of EBECRYL 83 cured by UV or electron beam (EB) demonstrate high gloss, solvent resistance and low residual odor. EBECRYL 83 is especially suited to applications requiring low viscosity and fast UV cure, including overprint varnishes and flexographic inks.

EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing.EBECRYL LEO 10551 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

SPECIAL Turquoise Blue AE 01 is a dye used in wood stains, detergents, car cleaners, and waterborne inks.

EBECRYL® 250 is an undiluted high molecular weight aliphatic urethane diacrylate resin, characterized by its light color and lower viscosity. Films of EBECRYL® 250 cured by exposure to ultraviolet light (UV), electron beam (EB) or by means of peroxide are soft and flexible, exhibiting the inherent non-yellowing properties typical of an aliphatic urethane. This resin is most often used as an additive to improve the flexibility of finished formulations.

EBECRYL® 367 is a polyester acrylate, developed to improve the adhesion of inks and varnishes onto plastics.

TEGO® AIREX 923 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown.

ACEMATT® OK 607 is a fine particle sized wax-treated precipitated silica. It is suitable for pigmented and non-pigmented systems.

CRAYVALLAC® LA-150 is a new pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to solvent based systems.CRAYVALLAC® LA-150 is a post-addition rheology modifier composed of a modified urea dissolved in DMSO. When added to the final system, the DMSO is diluted and the modified urea crystallizes out as very fine fibres which build into a three-dimensional interacting network. It is this network that gives rise to the system’s shear thinning rheology and time dependent viscosity recovery. The result is excellent control of sedimentation combined with ease of application. Immediately following application, where low shear conditions again predominate, the system’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependency is known as thixotropy and enables the final system to attain very good levelling.

TEGO® DISPers 755 W is a slightly anionic,polymeric high-performance wetting and dispersing additive for waterborne formulations.Suitable for all kindsof pigments. With organic pigments, the outstanding stabilization and viscosity reduction can be observed. Low influence on coating properties, therefore suitable for exterior applications in industrial and transportation coating.Solvent-free.

SUKOREZ® SU-500 is a hydrogenated water white C5/Cyclic hydrocarbon resin with softening point around 100°C. it can be used in hot melt PSAs and hot melt adhesives with good compatibility with SIS, EVA, polyolefins and etc. Especially, it can be used for applications where require good thermal stability in terms of color.

MKOREZ® MK-85 is made from highly purified monomers such as styrene and/or alpha methyl styrene. This pureness of raw materiaals can make the resin has water white color with high aromaticity than that of conventional hydrogenated resins at the same time. This has good heat stability and excellent potential as modifer in LAT (Low Application Temperature) adhesive compounds badsed on SBCs (SIS, SBS,or SEBS etc) This can be also used in other kinds of adhesive like EVA based hot melts and various rubber compounds as well.