Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Oligomer, Monomer
- Product Code
- MITM14558
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL®® 250 is characterized by:
- Light color
- Relative low viscosity
UV/EB cured products based on EBECRYL®® 250 are characterized by the following performance properties:
- Improved flexibility
- Non-yellowing
The actual properties of UV/EB cured products also depend on the selection of the other formulation components, such as reactive diluent(s), additives and photo initiators.
Applications & Uses
- Adhesive & Sealant End Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Applications
Formulated UV/EB curable products containing EBECRYL® 250 may be applied by lithographic, screen, gravure, direct or reverse roll, curtain coating and manual coating methods.
EBECRYL® 250 is recommended for use in:- Lithographic and screen inks
- Coatings for plastics and metals
- Laminating adhesives
- Flexibilizers for other UV/EB curable products
- Non-yellowing coatings
Properties
- Physical Form
Technical Details & Test Data
- Viscosity Reduction
- EBECRYL® 250 can be diluted with reactive monomers such as 1,6- hexanediol diacrylate (HDDA) and isobornyl acrylate (IBOA), methyl methacrylate (MMA), hydroxypropyl methacrylate (HPMA) and isobornylmethacrylate (IBOMA).
- The specific reactive diluent(s) used will influence performance properties such as hardness and flexibility. HDDA and IBOA are produced by allnex
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
- Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight.
- This might cause uncontrollable polymerization of the product with generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container.
- EBECRYL® 250 should not be stored for more than 2 years.
Other
- Appearance (SDS)
- Liquid
- Color (SDS)
- Clear colorless
- Immiscible In (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight, Contact with skin may cause a cross-allergic reaction in persons already sensitized to acrylates.
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Material Composition
Value Units Test Method / Conditions Solid Content 100.0 - - Mechanical Properties
Value Units Test Method / Conditions Tensile Elongation 150.0 - on a 125μm UV cured film Tensile Modulus 3.3 MPa MPa on a 125μm UV cured film Tensile Strength 2.4 MPa MPa on a 125μm UV cured film - Optical Properties
Value Units Test Method / Conditions Color Scale 50.0 APHA APHA - Physical Properties
Value Units Test Method / Conditions Density 1.08 g/cm³ g/cm³ Glass Transition Temperature (Tg) -59.0 °C °C on a 125μm UV cured film Molecular Weight 5000.0 g/mol g/mol Storage Temperature 39.0-104.0 °F °F Viscosity 34000.0 - Cone-Plate Viscometer at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.03 g/cm³ g/cm³ Viscosity (SDS) 3000.0-5000.0 - DIN 53019 at 60°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 -