Products

Addocat® LTB is a catalyst for epoxy resins.

Addonyl® CR CATALYZE is a ready to use catalyst batch and it is used in combination with the activator batch Addonyl® CR ACTIVATE during the production of Cast Nylon (PA-6 G).

Addonyl® Kat NL is a premium cast Nylon 6 plastic, renowned for its high molecular weight and superior performance. Manufactured through an advanced anionic polymerization of caprolactam, this material is created via a pressureless casting process where molten monomeric caprolactam is poured into molds and directly polymerized. The result is a high-quality semi-finished product or molding with excellent mechanical properties and durability, ideal for demanding industrial applications.

Cotin® 228 W/Xylene is a liquid organotin carboxylate catalyst recommended for use in room temperature vulcanised (RTV) silicone systems and polyurethane foams and elastomers. Cotin® 228 W/Xylene should be considered a “moderate to rapid” catalyst, for relatively faster cure. It does not utilize acetic acid in its manufacture, and therefore, does not have the odor or corrosiveness normally associated with organotin acetates.

Cotin® 227 is a dibutyltin diacetate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

Cotin® 200 is a dibutyltin dilaurate, a liquid organotin catalyst recommended for the manufacture of silicone and polyurethane systems. It can be used in these primary reactions as well as secondary types such as allophanate and biuret formation.

Cotin® 430 is a dioctyltin carboxylate recommended for the manufacture of silicone and polyurethane systems. Cotin® 430 is considered a "slower" catalyst. As a result, this catalyst is primarily used in silicone reactions and polyurethane formulations where slower catalysis is required.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

Addocat® PP is a versatile catalyst for PUR applications, example coatings, rigid and flexible foam, cellular elastomers.

Cotin® 280 is a liquid organotin carboxylate catalyst recommended for use in room temperature vulcanised (RTV) silicone systems and polyurethane foams and elastomers. Cotin® 280 should be considered a “moderate to rapid” catalyst, for relatively faster cure. It does not utilize acetic acid in its manufacture, and therefore, does not have the odor or corrosiveness normally associated with organotin acetates. Cotin 280 should be used at an equal active weight basis as dibutyltin diacetate.

Addocat® 118 is a catalyst for the production of PUR rigid foams.

Addocat® DB is a catalyst for the production of PUR foam, example flexible ester slabstock foam and rigid foam.

AEROXIDE® TiO2 P 90 is a highly dispersed titanium dioxide manufactured according to the aerosil process.

Addocat® 108 is a catalyst for the production of PUR flexible slabstock foam and hot-molded foam. It is also used for HR foam and, as a co-catalyst, for rigid foam.