Products

C9-11 Acids are high purity, conjugated drying oil acids for alkyd resins, epoxy esters and copolymers requiring a combination of flexibility, adhesion, baking speed, color retention, chemical resistance, mar resistance and water resistance. The C9-11 Acids contain a negligible amount of linolenic acid, a yellowing factor, and a combined oleic and saturated acid content of less than 10%. There are no rosin acids or unsaponifiable matter present.

Cotrol™ AMB is an ammonium benzoate-based flash rust corrosion inhibitor. It is a cost-effective flash rust inhibitor that does not leave water-soluble components in the cured film thereby causing water sensitivity problems.

Castorwax® is a wax like compound obtained by the controlled hydrogenation of pure castor oil. The principle constituent is glycerol tri-(12-hydroxystearate), also known as opalwax. Castorwax® is a hard, brittle, high melting point wax that is insoluble in most organic solvents but is highly compatible with most resins and waxes.

Vorite® 115 has been polymerized by a unique process, which imparts excellent thermal and viscosity stability. They function as polymeric plasticizers for elastomers in adhesive and sealant applications.

Polycin® D-290 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane coating systems. Polycin® D-290, with its very low viscosity, will allow for the formulation of higher system solids with improved VOC reduction. Polycin® D-290 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

Caspol™ 5009 is a 100% solids, castor oil based reactive diluent designed to allow VOC modification of urethane coatings with no loss of or decrease in film properties or cure speed. Caspol™ 5009 was developed to eliminate the typical slow cure rate of the castor oil polyols with a product that would deliver the fast cure desired for transportation coatings while maintaining good potlife.

Polycin® 934 M-4 is a elastomeric polyurethane compound for use in fiber optic and copper cable filling applications. It has a low viscosity and extended pot life to form an effective water block, and excellent flexibility, electrical, and long term stability properties. Polycin® 934 M-4 is especially applicable for environmental protection of electrical devices.

Dibutyl Sebacate is a specialty plasticizer that provides excellent compatibility and superior low temperature properties to a variety of polymers. The low temperature advantages of DBS make this material an ideal choice for vinyl food contact films used in refrigeration.

Polycin® 53 is a 100% solids, multifunctional castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. It will impart flexibility and improved pigment wetting into many polyurethane systems. Polycin® 53, as a reactive diluent, will allow for VOC reduction while imparting the beneficial properties of castor oil derivatives, such as improved flow and leveling.

Crystal® O PC is a triglyceride expressed from the seeds of the ricinus communis plant. Crystal® O PC is a refined castor oil with excellent oxidative stability. It is odorless, tasteless, light in color, and has good clarity.

P-™10 Acid Low color castor oil fatty acids is castor oil fatty acids, derived from pure castor oil. P-™10 Acid Low color castor oil fatty acids is the building block for modifying many performance properties of a broad range of industrial chemicals. These performance enhanced chemicals are then used in a variety of consumer products, including paints, adhesives, soaps and inks.

LITHIUM RICINOLEATE is the lithium salt of Ricinoleic acid.