Products

DURATRACK™ R-100 Emulsion is a specially designed all-acrylic resin for fast drying and high-performance traffic markings. The combination with DURATRACK™ AEH- 100 Acrylic-Epoxy Hybrid as a two-component waterborne coating system demonstrates to have excellent durability, aggregates retention, wear resistance and adhesion to road surfaces. In addition, it brings such benefits as long pot-life, ease of handling and application. The installation of DURATRACK™ coating system with equipment normally for typical waterborne traffic paint significantly reduces the total cost compared to other two-component coating systems. DURATRACK™ coating system is ideal for building high quality and large scale of green bike lane networks.

ACRYSOL™ RM-825 Rheology Modifier is a nonionic urethane rheology modifier, designed for formulating interior/exterior paints ranging from highly structured to paints that portray nearly Newtonian behavior. ACRYSOL™ RM-825 Rheology Modifier rheology modifier shows a very good balance of flow and high shear viscosity. The nature of this balance is dependent on formulations and latex types. This allows the formulation of paints meeting a variety of rheological requirements. ACRYSOL™ RM-825 Rheology Modifier can be used as a co-thickener in many types of formulations for attaining a desired balance of low and high shear viscosities. It has excellent water and alkali resistance.

TAMOL® 1124 is a high performance hydrophilic copolymer which offers outstanding performance in a wide range of latex paint formulations from high gloss enamels to low sheen flats. Designed for excellent stability and compatibility with modern latex paint additives, TAMOL® 1124 dispersant is an excellent choice for the modern paint formulator.

RHOPLEX® 2601 is a versatile binder designed for interior and exterior coatings and can be formulated across a broad PVC range. For exterior durability, higher coalescent levels may be needed to ensure good film formation in higher PVC paints. While RHOPLEX® 2601 is a harder latex binder, it should be noted that it is possible to develop low VOC paints with the use of low VOC coalescents (i.e. DOWANOL™ LoV 485 Glycol Ether, Optifilm 400, etc.).

RHOPLEX® CL-106 acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers based on RHOPLEX® CL-106 acrylic emulsion are translucent in the can and upon application turn clear very rapidly while drying. RHOPLEX® CL-106 acrylic emulsion was developed for use in topcoat finishes and as such does not provide optimum appearance qualities if used as a sealer. In multi-coat systems, the finest overall appearance is obtained when RHOPLEX® CL-106 acrylic emulsion is used over specialized sealer formulations. It is recommended that RHOPLEX® CL-106 acrylic emulsion be used over sealers formulated from RHOPLEX® CL-105 emulsion. In this manner, RHOPLEX® CL-105 emulsion contributes excellent wood fiber wetting, appearance characteristics, and early sandability to the system while RHOPLEX® CL-106 emulsion provides a topcoat with hardness, mar resistance, and clarity. The volatile organic content (VOC) of typically formulated clear topcoat lacquers is less than 2.3 lb/gal and hazardous air pollutants (HAPs) are 0.3 lb HAPs/lb solids.

ACRYSOL™ RM-7 Rheology Modifier is a remarkably versatile hydrophobically modified alkali-soluble emulsion (HASE) thickening agent for latex coatings. Like other HASE modifiers, ACRYSOL™ RM-7 Rheology Modifier offers a nearly Newtonian rheology profile with lower viscosity in low-shear conditions and higher viscosity in high-shear conditions than cellulosic thickeners deliver. As a result, it can produce paints with a very desirable combination of good flow/leveling and film build properties. ACRYSOL™ RM-7 Rheology Modifier is distinguished by a capacity to generate high-shear viscosity very efficiently, a feature that makes it exceptionally well suited to use with all acrylic emulsions, being developed for low-VOC, non flat waterborne paints.

ROSHIELD™ 3275 is specifically designed for reaction with water- dispersible polyisocyanates for wood coating applications where early hardness and sandability are important, under mild drying conditions. Unlike nitrocellulose lacquers, solventborne 2-component polyurethanes, and solventborne acid catalyzed finishes, waterborne polyurethane coatings based on this acrylic polyol have extremely low VOCs and very good early print resistance. In addition, films based on this emulsion are water- white and resistant to yellowing. ROSHIELD™ 3275 cures under ambient conditions, but heat on-line is recommended for early pack-out. Applications for this excellent, cost/performance, 2- package system include clear, pigmented and flatted systems for office and laboratory furniture, kitchen cabinets and fine furniture.

EVOQUE™ 3150C was engineered to enhance titanium dioxide efficiency, providing improved hiding or equivalent hiding at a reduced titanium dioxide usage level. This acrylic emulsion incorporates ambient crosslinking technology, which improves household stain resistance performance and chemical resistance properties. Based on prior commercial iterations of EVOQUE™ technology, the overall exterior durability is anticipated to be excellent.

TAMOL® 2011 is a high-performance, hydrophobic copolymer dispersant especially useful for semi-gloss and gloss paints. TAMOL® 2011 is well suited for today’s generation of formulations as it is made without solvents or APEO surfactants. TAMOL® 2011 is particularly well fitted for formulations that contain hydrophobically modified urethane rheology modifiers.

TAMOL® 1254 is a versatile, low-cost, low-foaming polyacid dispersant that offers outstanding performance in a wide range of latex paint formulations. It is recommended for low sheen flats through gloss acrylic, styrene-acrylic and vinyl acrylic formulations. In addition to good efficiency, this polyacid dispersant offers excellent stability and color acceptance even in formulations containing zinc oxide.

PARALOID™ AU-608B are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

POLYCO™ 4160 is a binder and resin used in architectural coatings, automotive OEM coatings, industrial coatings, and paints and coatings applications.

ROVACE™ 9900 Emulsion Polymer represents the new generation of vinyl acrylic binders for architectural coatings. This unique binder sets a new standard of performance for architectural paints. ROVACE 9900 Emulsion Polymer does not require the use of coalescing solvents for film formation and application properties. This new, state of the art solvent-free PVA demonstrates comparable or even higher scrub resistance than the best of the high scrub PVAs at various PVC levels and volume solids. The other distinct advantage is the low odor, both in the form of emulsion and also in finished paint. Excellent pigment binding allows a wide range of pigment volume concentrations from flat to semigloss with outstanding properties.

FORMASHIELD™ 12 is an aqueous all-acrylic emulsion polymer designed for use in premium, ultra-low VOC interior paints. Paints can be formulated with FORMASHIELD™ 12 Binder to actively and irreversibly remove formaldehyde from the ambient air in commercial or residential interior spaces, offering significant improvement in Indoor Air Quality.

TAMOL® 983 is a versatile, low-cost, non-foaming, water-soluble polyacid dispersant which offers excellent performance in a wide range of latex paint formulations. It is recommended for low sheen flat through semi-gloss acrylic, stirene-acrylic and vinyl acrylic formulations and is effective over a pH range of 7-11 with a wide temperature range.