Products

Dynasylan® HYDROSIL 2909 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is almost color- less aqueous solution with an amine-like odour, miscible with alcohols or water.

Protectosil® WS 340 PLUS ia a aqueous emulsion based on organofunctional silanes and siloxanes for the water repellent impregnation of mineral substrates while providing an excellent water beading effect.

Dynasylan® SIVO 112 resembles a hydro- and oleophobic additive for Dynasylan® SIVO 110, a novel water-borne, sol-gel binder system.

Dynasylan® HYDROSIL 2627 is an aqueous oligomeric aminoalkyl-functional silane hydrolysate. It is a colorless to slightly yellowish aqueous solution with an amine-like odour, miscible with alcohols or water.

Dynasylan® 2201 EQ is a bifunctional organosilane possessing a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group.

Dynasylan® F 8263 acts as a surface modifier on oxidic, carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). Dynasylan® F 8263 is a colorless liquid. It can be diluted in alcohols and various other organic solvents, e.g. n-hexane, xylol, acetone or ethyl acetate.

VPS SIVO 260 is a novel multifunctional siloxane adhesion promoter with aminofunctionalities that can be used for various applications. VPS SIVO 260 is mainly dedicated for use in adhesives and sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers®) and RTV-silicones - especially to difficult to stick polycarbonate substrates. In addition, VPS SIVO 260 can lead to adequate adhesive cure and it imparts both additional flexibility and hydrophobicity.

Dynasylan® 1175 is a cationic polymeric aminofunctional silane possessing hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® 1175 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter and as a surface modifier. Dynasylan® 1175 is a dark yellow to brown liquid. Dynasylan® 1175 contains 40% active ingredient and about 60% of methanol. Dynasylan® 1175 is miscible with water, with hydrolysis occurring.

Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives and; sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity.

Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colorless, nearly odorless low ­viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE).

Protectosil® 100 is a clear, penetrating, breathable VOC compliant reactive penetrating sealer for use on concrete. Protectosil® 100 is an isobutylalkoxy functional silane allows for faster dry times and superior performance on high quality mix designs typical of new bridge decks. Creates a deep hydrophobic layer that prevents water and waterborne contaminants from entering the substrate and causing premature deterioration. By combining ultra-low surface tension with a tailored rate of reaction, Protectosil® 100 is able to move through the moisture boundary layer that lines the pore structure of the substrate. This permits the development of uniform gradient permeation, consistent level of protection throughout the entire depth of penetration, allowing for longer treatment life, especially on wearing surfaces.

Dynasylan® GLYMO is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® GLYMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYMO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.

Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier.