Products

Licowax® LP flakes is a acid wax.

SMY-LT is an easily dispensable rheological additive for waterborne systems. SMY-LT can disperse in water, forming a suspension gel. It provides excellent thickening and anti-settling properties, with good heat stability. It can also improve the open time for the coating film.

CARPOL® NIONIC™ L-81 Surfactant is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® NIONIC™ L-81 Surfactant can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ L-81 Surfactant is a good low temperature defoamer. These materials are water soluble at low temperatures and will flocculate when warmed above their cloud point. In addition these products are easily removed and leave no residue on the surfaces.

SURFONIC® LF-17 is an ethoxylated and propoxylated linear primary 12- 14 carbon number alcohol. The low-foaming and good surface active properties of it suggests its use in any application where foam control is necessary.

ALFONIC 1216CO-7 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. ALFONIC 1216CO-7 Ethoxylate is liquid at room temperature, essentially 100% active, and has the following structural formula: CH₃(CH₂)ₓ(OCH₂CH₂)₃OH, where ‘x’ varies between 11 and 15. The narrow-range version of this ethoxylate made using Sasol Chemicals patented NOVEL catalyst technology is also available.

Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

HYDROGRAL® is a hydrogenated rosin. The hydrogenation of rosin improves stability (ageing, UV resistance).

TERMUL® 1283 is an emulsifier used in ornamentals, pest control, turf management, and cleaning applications.

ALFONIC 1216CO-3 Ethoxylate is a biodegradable nonionic based on a linear primary alcohol formulated to simulate that derived from coconut oil. It is liquid at room temperature, essentially 100% active, and has the following structural formula: CH₃(CH₂)ₓ(OCH₂CH₂)₃OH where ‘x’ varies between 11 and 15. The narrow range version of this ethoxylate, made using Sasol Chemicals patented NOVEL catalyst technology, is also available.

GRANOLITE® TEG is a triethylene glycol- esterified rosin resin with low viscosity and very low VOC content. Thanks to its low viscosity, it flows easily and is ideal for use as a tackifier and plasticizing agent in various adhesive formulations, particularly for construction.

Licocare® RBW 101 powder VITA is a polar modified wax based on renewable resource.

ZINC STEARATE XM ULTRAFINE HYDENSE is a medium to low bulk density, fine white powder.

HECTGEL RD is a synthetic layered silicate consisting of Li, Mg and Si. Its structure is constituted by two layers of Si-O tetrahedron with one layer of Mg-O octahedron. It can hydrate with water and swell to form clear and colorless colloidal dispersions. Highly thixotropic gels can be formed at concentrations of 2% or more and these gels demonstrate highly shear thinning behavior. HECTGEL RD is used where a shear sensitive waterborne gel structure is desired, having high viscosity under low shear and low viscosity when exposed to high shear. Upon removal of shear the gel viscosity is quickly recovered.

Focus Additive RP RZ8 is a very cost effective water-soluble corrosion inhibitor additive designed to impart temporary rust protection for ferrous and non-ferrous applications. It does not contribute to discoloration on the surface of non-ferrous metals. It imparts lubrication properties when used at higher concentrations. It is designed to have a relatively low pH and high acid content, which provides the ability to formulate fluid concentrates with a variety of alkaline sources. Focus Additive RP RZ8 is non-foaming and has excellent stability in hard water up to 1500 ppm hardness. Focus Additive RP RZ8 gives rust protection when water evaporates. The thin liquid film that remains provides rust protection to ferrous surfaces, even under high humidity conditions. This film can easily be removed by rinsing with water. It also burns off cleanly in high temperature processing operations. Focus Additive RP RZ8 is composed of a mixture of organic acid salts, is DEA free and can be waste treated by adjusting the pH below the methyl orange end point.

AEROSIL® 300 is a hydrophilicfumed silica with a specific surface area of 300 m²/g. Itprovides a verystrong rheologicaleffect.