Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Cleaning Ingredients Functions
- Industrial Additives Functions
- Product Code
- MITM14668
- Single Ingredient
- Yes
- Synonyms
- Alabama Blue Clay, Bentolite, Na-Cloisite
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- HII Features
- Industrial Additives Features
Applications & Uses
- Coating End Applications
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Markets
- Applications
- Product Applications
- Latex
- Ceramics
- Architecture/Foundry coating
- Polishes and cleaners
- Textile finishing agent
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Incorporations
- SMY-LT is added to vessel containing only water at temperature 25-30°C, then, mix at speed 1500-2000 rpm for 20-30 min.
- After sufficient hydration time, the homogeneous pre- gel will be ready.
- Place it for 8-24 hours.
- Add pigments, fillers, and active ingredients and disperse, then, complete dilution. 2-4% concentration is recommended for pre-gel.
- Better performance can be achieved by applying pre-gel method.
Storage & Handling
- Storage and Shelf Life Conditions
- SMY-LT Bentonite has a shelf life of at least two years from date of manufacture. Store in a cool dry place.
Other
- Appearance
- Off-white finely powder
- Appearance (SDS)
- Off white to light cream to pale yellow fine powder
- Dosage (Use Level)
- 2.0-4.0 %
- Group Principal Number
- S002202
- Insoluble in (SDS)
- Insoluble
- Moisture Content
- max. 10.0 %
- Other Hazards
- Long term exposure to airborne dust concentrations above the recommended exposure guide lines may cause lung damage. Precautions for flammable organic dusts should be provided. Avoid high dust concentrations. Assure all equipment is properly grounded to prevent static discharges, and vented to provide for potential energy release.
- Principal
- Shelf Life
- 2.0 yr
- Specific Gravity (SDS)
- 0.15-0.5
- USA/DOT Proper Shipping Name
- Not Applicable
- USA/DOT UN Number
- Not Applicable
- Viscosity
- min. 500.0 mPa.s
- Volatile Content (SDS)
- 6.0-15.0 %
- pH (SDS)
- 6.0-11.0
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr yr - Physical Properties
Value Units Test Method / Conditions Moisture Content max. 10.0 % % At 105°C, 2 H Viscosity min. 500.0 mPa.s mPa.s at 2% 60rp - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 2.0-4.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Specific Gravity (SDS) 0.15-0.5 - Volatile Content (SDS) 6.0-15.0 % % pH (SDS) 6.0-11.0 -