Elastomers

Solumer™ 851T is an ultra-low density ethylene-octene copolymer produced via NexleneTM technology. It has excellent flow characteristics and provides superior impact resistance with other polymers.

AQUAPOL® PI-13000-31 Prepolymer is an aliphatic urethane, end-capped prepolymer con- taining un-reacted isophorone diisocyanate (IPDI). Aquapol PI-13000-31 prepolymer will gel up to five times its weight of water and can be used to form stable gels with water. In contrast, concentrations of Aquapol PI-13000-31 prepolymer above 50% will result in closed cell foam rather than a gel. Gels will lose water to the atmosphere and should be protected with an impermeable membrane. The speed of reaction can be increased or decreased by using warm or cold water respectively and by the concentration of the amine catalyst. Using cold water will reduce any tendency toward frothiness.

CARPOL® GP-6305-55 Polyol is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6300 Da. This triol is polymerized with propylene oxide and then capped with 5% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., however, CARPOL® GP-6305-55 Polyol may also be included as a component in other urethane products and formulations.

Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colorless, nearly odorless low-viscosity liquid.

Bayferrox® 6730 is an inorganic pigment, specifically Pigment Red 101, based on iron(III) oxide. It is a single ingredient product used in various industrial applications for pigmentation.

Silcolapse® 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

CARPOL® GP-700 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E. and flexible foam, however, CARPOL® GP-700 may also be included as a component in other urethane products and formulations.

AEROXIDE® TIO2 T 805 is a highly dispersed, fumed titanium dioxide that has been treated with octylsilane to achieve a hydrophobic surface. This product is not intended for use as a UV-filter in cosmetic sunscreen formulations. Microfine titanium dioxide for use as a UV-filter in cosmetic sunscreens is available from Evonik Consumer Specialties under the tradename TEGO® Sun T 805.

Polyfill 301SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

AEROSIL® R 974 is a hydrophobicfumed silica after-treated with DDS (dimethyldichlorosilane).

AEROSIL® R 972 Coating is a fumed silica after-treated with DDS (dimethyldichlorosilane). It is easy to disperse and suitable for a broad range of applications.

CARPOL® GSP-520 is a glycerin/sucrose-initiated polyether polyol. The high functionality of the initiators yields a resultant polyol with a nominal functionality of five and a typical hydroxyl number of 520. Due to this polyol’s high functionality, it is typically used in rigid foam and its applications. Blending CARPOL® GSP-520 with other polyether polyols allows for foam systems with high to lower degrees of crosslinking.

AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane).

SIPERNAT® 320 DS is a highly dispersible silica powder with high surface area, commonly used in coatings, adhesives, and sealants. It improves rheology, reduces viscosity, and provides enhanced flow properties. It is widely used in industrial and consumer goods applications for improving the performance and consistency of the final product.