Electrical & Electronics

CARPOL® GP-725 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 700 Da. This triol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® GP-700. Main applications include C.A.S.E., however, CARPOL® GP-725 may also be included as a component in other urethane products and applications.

CARPOL® PGP-2000-60 initiated polyether polyol. CARPOL® PGP-2000-60 has a functionality of two and an average molecular weight of 2000. This diol is polymerized solely with propylene oxide for controlled reactivity.

CARPOL® EDAP-800 is an ethylenediamine-initiated polyether polyol. The resulting material has a nominal functionality of four and a typical hydroxyl number of 800. This tetrol is polymerized with ethylene and propylene oxides and is autocatalytic due to its amine content. This polyol’s functionality makes it optimal for use in rigid foams as a crosslinking modifier. In addition, CARPOL® EDAP-800 can also be used as a curative for most C.A.S.E. applications.

Agimid® 243 N120-S is a plasticized, heat and light stabilized and impact modified product for extrusion. The main application is colored pneumatic tubes for industrial and automotive markets. The Agimid® range holds 3 long-chain polymers including 2 bio-based materials which have a broad range of applications in key markets such as automotive, industrial vehicles, sports, leisure, electrical, electronics and industrial.

Agimid® 210B000 is a PA 12 rigid with high fluidity dedicated to the injection molding. The main application is cable ties for the electric and electronics market.

DERTOPHENE® T is a light-colored and low VOC terpene phenolic resin compatible with acrylics, various elastomers and waxs. It allows to improve the performance of hot melt and solvent based adhesives such as specific adhesion and tack.

D.E.R.® 331 liquid epoxy resin is a liquid reaction product of epichlorohydrin and Bisphenol A.

BONDERITE® L-GP 154 RFU a specially processed colloidal graphite dry film lubricant, air dries rapidly at room temperature and adheres tenaciously to most substrates with minimum surface preparation. The thinness of the coating, coupled with high lubricity, provides clean, long-wearing lubrication without redesign of component dimensions. Supplied in Ready-For-Use form, coatings are easily applied during manufacture or assembly by standard spray techniques. BONDERITE L-GP 154 RFU ACHESON (known as DAG 154 RFU) is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics.

D.E.R.® 337 liquid epoxy resin is a semi-solid reaction product of epichlorohydrin and Bisphenol A.

3M™ Glass Bubbles HGS4000 is used for drilling and cementing across highly depleted zones and weaker formations, low-density systems are required to prevent/minimize problems associated with excessive overbalance conditions including fluid loss/lost circulation, differential sticking, minimal penetration rates, formation damage, and reduced well productivity.

D.E.R.® 353 liquid epoxy resin is a mono-functional reactive diluent modified liquid epoxy resin.

CARPOL® PGP-2740 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2740 has a functionality of two and an average molecular weight of 2700 Da. This diol is polymerized with propylene oxide and then capped with 40% ethylene oxide. The outcome is a polyol with enhanced reactivity and hydrophilicity.

D.E.R.® 354 liquid epoxy resin is a standard liquid epoxy resin based on the reaction products of bisphenol f and epichlorohydrin.

DzBh Baling® SEBS YH-688 is a radial hydrogenated styrene/butadiene block copolymer designed with high midblock content to increase the compatibility with polypropylene.