Cement & Concrete Additives

ACRYLTAC® SP-462 is an all acrylic surfactant stabilized polymer emulsion.

HIKOTACK® P-120HS is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. This grade has relatively higher softening point than HIKOTACK® P-120HS, and is mainly used as vehicles for paint and ink products, water repellent agent, concrete curing agent and binder for asphalt.

Protectosil® WS 610 is an organofunctional siloxane based waterborne emulsion with almost no volatile organic components (VOC). Protectosil® WS 610 is used for water proofing of mineral building materials. The main application is facade impregnation creating a water beading effect at the surface. Protectosil® WS 610 reduces the ingress of water and waterborne contaminants into the substrate and thereby prevents premature deterioration. Protectosil® WS 610 chemically bonds with silica to form a permanent attachment of water repellent molecules while also providing an excellent beading effect on the surface. Protectosil® WS 610 is supplied as a 50% water-borne emulsion. It is mainly used to manufacture formulations with lower concentration of active ingredient in water.

Protectosil® 200N is an ultrapure, colorless, solvent-free liquid water repellent based on Isobutylalkoxysilane, intended for the external waterproofing of mineral building materials. The ultrapure material is quaranteed to not leave a residue on non-porcus substrates, such as glass or aluminum window framing. Protectosil® 200N chemically bonds with silaceous materials to form a permanent attachment of the water repellent molecule. Creates a deep hydrophobic layer which prevents water and waterborne contaminants from entering the substrate and causing premature detioration. Protectosil® 200N may be used as a concentrate or it can be diluted to manufacture other products and formulations.

Silcolapse® 621 is a 10% silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. Silcolapse® 621 gives good results at wide-ranging pH and is particularly effective under alkaline conditions.

Hemp Bast Short Fiber Blend is decorticated, clean and ready for integration into textiles, non-wovens, bio composites and more.Hemp Bast Short Fiber Blend is the strongest natural fiber and is a good sustainable rotation for our farmers.

D.E.H.® 517 is used as a curing agent for epoxy resins. It has low viscosity and results in fast set time, high strength and modulus and provides good thermal resistance and resistance to acids and alkalis. D.E.H.® 517 has wide variety of applications in adhesives, trowelable flooring, mortars, grouts, patching compounds.

HIKOTACK® P-90HS is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. HIKOTACK® P-90HS can be used as tackifier for Ethylene Vinyl Acetate (EVA) based hot melt adhesive (HMA), water repellent agent, concrete curing agent and binder for asphalt.

Dynasylan® SILBOND® H-5 is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for the precision investment casting industry. It contains a higher percentage (approximately 19.5%) silica content (as SiO₂) and a lower acidity level than Dynasylan® SILBOND® H-4. It is well suited for use in block-casting applications.

Silcolapse® 623 is a 30% silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. Silcolapse® 623 gives good results at wide-ranging pH and is particularly effective under alkaline conditions.