Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Product Code
- MITM12538
- Technologies
- Product Families
Features & Benefits
- Industrial Additives Features
- Labeling Claims
- Product Advantages
- Easy to use – as supplied or pre-diluted in water or in the medium to be defoamed
- Cost efficient, effective in doses as low as 10 ppm
- Highly effective in most aqueous media, and at many pH levels
- Chemically inert in foaming systems – will not alter the properties of the foaming medium
- Heat resistant – withstands temperatures up to 120°C (248°F)
- Low viscosity allows it to be used with automatic metering systems
Applications & Uses
- Applicable Processes
- Industrial Additives End Use
- Markets
- Applications
Properties
- Physical Form
- Soluble In
Regulatory & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Technical Details & Test Data
- Instructions for Use
Trial tests should be carried out to determine the quantity of antifoam needed to produce best results. Testing should be started at 10 ppm and increased or decreased based on the results. If prediluting product, do not use less than 1% solids and always dilute water into silicone. Infrequently, separation can occur during transport or storage; if this occurs, agitate gently until homogeneous.
Packaging & Availability
- Packaging Type
- Packaging Information
Silcolapse® 623 is available in 1000 kg totes, 200 kg drums and 20 kg pails.
Principal Information
- Group Principal Number
- S002177
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
When stored in the original, unopened container between (5-40°C), Silcolapse® 623 can be stored for 12 months from the date of manufacture.
Other
- Appearance
- Opaque white liquid
- Color (SDS)
- White
- Insoluble in (SDS)
- Organic solvents
- Item Number
- Odor (SDS)
- Slight odor
- Other Hazards
- No data available
- Oxidizing Properties (SDS)
- Not considered as oxidizing
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 6.8-8.5 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life1 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Specific Gravity 1.0 - Viscosity 500.0-2000.0 cPs cPs - Material Composition
Value Units Test Method / Conditions Silicone Active Content 30.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Density (SDS) 1.0 kg/dm³ kg/dm³ at 20°C pH (SDS) 8.0 -