Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Function
- Extreme Pressure Additive
- Product Code
- MITM08124
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Labeling Claims
Applications & Uses
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Markets
- Applications
- Product Applications
- Fully synthetic metal working fluids (oil-free)
- Semi-synthetic metal working fluids (low oil content)
- Substitution of EP-emulsions by oil-free aqueous EP-solutions
- Tank-side-addition of metal working solutions
- Additin® RC 5202 US is a clearly water-soluble EP-additive used for severe metal working operations with fully synthetic fluids (e.g. ironing of tins or fine wire drawing).
- Typical treatment levels in MWF concentrates are 3 to 15 %.
- For tank-side addition of metal working solutions 0,2 to 0,5 % are used.
- For supporting lubricity and AW-performance a combination with Additin RC 5010 (e.g. ratio 1 part RC 5202 and 1 part RC 5010) is recommended.
- If Additin® RC 5202 US is used as tank-side-additive for metal working solutions, pay attention that lubricity additives (e.g. Additin RC 5010) are already in the solution.
Properties
- Physical Form
- Soluble In
- Solubility Data
- Additin RC 5202 is generally well soluble in water miscible concentrates with a high water content (> 30 %).
- However, it is necessary to verify the solubility in the base fluids used and the compatibility with other additives.
- Used as tank-side additive Additin RC 5202 is soluble by sufficient turbulence of the metal working solution.
- Additin® RC 5202 US is not soluble in mineral oils and ester oils.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
- Protected from light and in a dry place at room temperature approx. 24 months
Other
- Appearance
- Yellow liquid
- Color (SDS)
- Clear to yellow
- Item Number
- Odor (SDS)
- Slight characteristic
- Other Hazards
- None known
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Application Information
Value Units Test Method / Conditions Dosage (Use Level) 0.2-0.5 % % Tank-side addition of metal working solutions Dosage (Use Level) 3.0-15.0 % % Typical treatment levels in MWF concentrates - Chemical Properties
Value Units Test Method / Conditions pH 10.0 - pH 9.0 - 1% deionized Water - Material Composition
Value Units Test Method / Conditions Sulfur Content 21.0 % % - Physical Properties
Value Units Test Method / Conditions Density 1.34 g/mL g/mL DIN 51757 at 25°C Viscosity 5.0 mm²/s mm²/s DIN 51562 at 40°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 1.34 g/cm³ g/cm³ Melting Point (SDS) max. 0.0 °C °C Viscosity (SDS) 5.0 mm²/s mm²/s pH (SDS) 10.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 mo mo