Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Function
- Curing Agent
- Product Code
- MITM14772
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Adhesive & Sealant End Applications
- Coating End Applications
- Compatible Polymers & Resins
- Markets
- Applications
- Product Applications
It is used in combination with liquid Epoxy resins or epoxy resin modified by means of reactive as well as non-reactive diluents. Ideal for concrete repair compounds, castings, encapsulations, grouting, floor coating, potting and solvent free coatings, adhesive etc. Can be used in combination with polyamides or other hardener to reduce the viscosity.
Properties
- Physical Form
- Product Properties
Epoxy coating systems cured with AP 5225 present the following features.
- Suitable for ambient temperature cure.
- Low viscosity with moderate pot life
- Good corrosion resistance.
Safety & Health
- Handling Precautions
The hardener will absorb moisture & CO2 when left in open containers. This may result in increased viscosity and sometimes crystallization. Use personal protective equipments and
follow industrial hygienic procedures. Recommended to use safety glasses, protective clothing, gloves, & masks suitable for chemical and solvents & their vapor.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S001795
- Principal
Storage & Handling
- Storage Conditions
- AP 5225 should be stored in a dry place, preferably in the sealed original container at temperatures 20 to 30°C. The Product should not be stored exposed to direct sunlight.Material may crystallize upon exposure to low temperature can be utilized after making it clear by heating the material. It is recommended that the material be heated to 50-70°C with continuously mixing for 1 hour. Once the material become fully homogenized,it can be cooled to room temperature and utilized under normal conditions
- Shelf life: (20 to 30°C): 12 Month.
- Hazardous decomposition products: (When in fire) Carbon monoxide, Carbon dioxide, Nitrogen Oxides and other toxic Gases & Vapors.
Other
- Appearance
- Clear Yellow colored liquid
- Appearance (SDS)
- Clear
- Color (SDS)
- Yellow
- IATA/ICAO Proper Shipping Name
- Amines, liquid, corrosive, N.O.S.
- IATA/ICAO UN Number
- UN2735
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-B
- IMO/IMDG Proper Shipping Name
- Amines, liquid, corrosive, N.O.S.
- IMO/IMDG Segregation Group
- SGG18, SG35
- IMO/IMDG UN Number
- UN2735
- Insoluble in (SDS)
- Water
- Item Number
- Odor
- Amine
- Odor (SDS)
- Amine - like
- TDG Canada Emergency Response Guide Number
- 153
- Temperature Control
- No
- USA/DOT Proper Shipping Name
- Polyamines, liquid, corrosive, N.O.S.
- USA/DOT UN Number
- UN2735
- Chemical Properties
Value Units Test Method / Conditions Amine Value 350.0-400.0 mg KOH/g mg KOH/g ISO 9702 - Optical Properties
Value Units Test Method / Conditions Color Scale max. 10.0 Gardner Gardner Color Scale max. 10.0 ASTM ASTM ASTM D1544 - Physical Properties
Value Units Test Method / Conditions Density 0.93-0.96 kg/L kg/L ASTM D1475 at 25°C Dry to Set Time 11.0-13.0 h h BK Dry Time Recorder at 25°C ,10 - 15 minutes induction time is required, 8 mils, 200 microns WFT Gelling Time 90.0-110.0 m m at 25°C, 100g Viscosity 300.0-600.0 mPa.s mPa.s DIN 53015 at 25°C Viscosity 300.0-600.0 mPa.s mPa.s ISO 12058 at 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 0.93-0.96 g/cm³ g/cm³ ASTM D1475 at 25°C Flash Point (SDS) min. 150.0 °C °C Cleveland Open Cup Viscosity (SDS) 300.0-600.0 mPa.s mPa.s ISO 12058 at 25°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo