AQUAPOL® PT-17000-62

AQUAPOL® PT-17000-62 Prepolymer is a toluene diisocyanate-based urethane polymer uti- lized in the manufacturing of hydrophilic foams and coatings. Aquapol® PT-17000-62 pre- polymer has found use in a wide range of applications ranging from medical foams, visco- elastic earplugs, cosmetic sponge, and specialty coatings and foams. Due to the hydro- philic backbone, this polymer and resultant foams and coatings absorb and retain a large quantity of liquid (water and alcohol).

Principal: Carpenter Chemical Systems

Chemical Family: Mixtures & Blends

End Uses: Compression Packaging, Cosmetic Foam, Cushions, Ear Plugs, Energy Absorber, Foams, Hydrophilic Foams, Medical/Healthcare Applications, Sporting Goods

Features: Good Absorbance, Hydrophilic

Safety Data SheetTechnical Data Sheet
View All Documents

Enhanced TDS

Identification & Functionality

Blend
No
Chemical Family
Mixtures & Blends
Product Code
MITM13481
Single Ingredient
Yes
Technologies
CASE,
Elastomers
Product Families
CASE — Monomers & Intermediates
Prepolymers & Polyols
Elastomers — Specialty Elastomers
Polyurethane Rubbers

Features & Benefits

CASE Ingredients Features
Good Absorbance,
Hydrophilic
Materials Features
Hydrophilic,
Good Stability,
Good Absorption

Applications & Uses

Plastics & Elastomers End Uses
Compression Packaging,
Foams,
Energy Absorber,
Ear Plugs,
Cushions,
Medical/Healthcare Applications,
Sporting Goods,
Hydrophilic Foams,
Cosmetic Foam

Properties

Physical Form
Liquid

Regulatory & Compliance

Certifications & Compliance
ISO 9001
Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Yes

Safety & Health

Safety Information
  • Polyurethane products manufactured or produced from this liquid system may represent a serious fire hazard if improperly used or allowed to remain exposed or unprotected.
  • The character and magnitude of any such hazard will depend upon a broad range of factors which are controlled and influenced by the manufacturing and production process, by the mode of application or installllllllllllation, and by the function and usage of the particular product.
  • Any flammability rating contained in this literature is not intended to reflect hazards presented by this or any other material under actual fire conditions.
  • These ratings are used solely to measure and describe the products response to heat and flame under controlled laboratory conditions. 

Principal Information

Group Principal Number
S001809
Principal
Carpenter Chemical Systems

Storage & Handling

Storage and Shelf Life Conditions

Shelf life is dependent on storage conditions. Components should be stored in tightly capped containers with nitrogen-blanketed head-space. Components should be stored in a temperature-controlled environment of approximately 75°F. Avoid extreme temperatures and significant changes in temperature. Always have an SDS available.

Other

Appearance (SDS)
Light yellow liquid
Insoluble in (SDS)
Water
Odor (SDS)
Pungent odor
Other Hazards
May cause slight eye irritation, May cause skin irritation on prolonged or repeated contact.
USA/DOT Proper Shipping Name
Environmentally hazardous
USA/DOT UN Number
UN3082
Shelf Life & Stability
ValueUnitsTest Method / Conditions
Shelf Life6.0 momo
Physical Properties
ValueUnitsTest Method / Conditions
Density1.17-1.2 lb/gallb/galAt 25°C
Viscosity12000.0-22000.0 cPscPsAt 25°C
Material Composition
ValueUnitsTest Method / Conditions
Isocyanate Content6.0-6.55 %%
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Flash Point (SDS)min. 200.0 °F°FPensky-Martens Closed Cup (PMCC)
Specific Gravity (SDS)1.07-1.2-water=1