Products

WANNATE® TL-75E is an aromatic polyisocyanate based on toluene diisocyanate. It is a colorless or pale yellow liquid with a solvent-like odor with approx. 75 % in ethyl acetate.

DURATRACK™ R-100 Emulsion is a specially designed all-acrylic resin for fast drying and high-performance traffic markings. The combination with DURATRACK™ AEH- 100 Acrylic-Epoxy Hybrid as a two-component waterborne coating system demonstrates to have excellent durability, aggregates retention, wear resistance and adhesion to road surfaces. In addition, it brings such benefits as long pot-life, ease of handling and application. The installation of DURATRACK™ coating system with equipment normally for typical waterborne traffic paint significantly reduces the total cost compared to other two-component coating systems. DURATRACK™ coating system is ideal for building high quality and large scale of green bike lane networks.

CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes CYMEL® 373 resin suitable for a wide range of fast-curing waterborne industrial coating formulations.

PURETOL™ 11 is used in food and nutrition, healthcare and pharma, and personal care applications.

Focus ChloroPar W-40 is a chlorinated compound based on C21-34 alkanes. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Toyal TCP-2 is used in chemical and industrial manufacturing, fillers, levellers and joints, and resin manufacturing markets. It is applied in fillers and thermal management.

ACRYSOL™ RM-825 Rheology Modifier is a nonionic urethane rheology modifier, designed for formulating interior/exterior paints ranging from highly structured to paints that portray nearly Newtonian behavior. ACRYSOL™ RM-825 Rheology Modifier rheology modifier shows a very good balance of flow and high shear viscosity. The nature of this balance is dependent on formulations and latex types. This allows the formulation of paints meeting a variety of rheological requirements. ACRYSOL™ RM-825 Rheology Modifier can be used as a co-thickener in many types of formulations for attaining a desired balance of low and high shear viscosities. It has excellent water and alkali resistance.

Epoxy Hardener - AP 5501 is a low viscosity, reactive poly amido amine hardener for epoxy resins based lacquers and coatings.

CYMEL® UI-27-EI Resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. CYMEL® UI-27-EI Resin is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. CYMEL® UI-27-EI Resin is not suitable for exterior applications.

ACRYSOL™ RM-3030 Rheology Modifier is a solvent-free1, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal mid-shear rheology response. ACRYSOL™ RM-3030 Rheology Modifier has demonstrated improved syneresis resistance in broad formulation latitude. ACRYSOL™ RM-3030 Rheology Modifier should be added under good mixing conditions to ensure complete incorporation into the formulation.

Baerostab® BZ 8785 - US is a Zn liquid stabilizer and kicker.

CAPMUL® GMO-50 is a mixture of monoglycerides, mainly glyceryl monooleate, together with variable quantities of diglycerides and triglycerides. It is obtained by esterification of glycerol with food-grade oleic acid of vegetable origin, or by partial glycerolys is of vegetable oil that consists mainly of triglycerides of oleic acid. A suitable antioxidant may be added. CAPMUL® GMO-50 is a multi-functional emulsifier useful in the production of cosmetics, pharmaceuticals, food and plastic products.

TAMOL® 1124 is a high performance hydrophilic copolymer which offers outstanding performance in a wide range of latex paint formulations from high gloss enamels to low sheen flats. Designed for excellent stability and compatibility with modern latex paint additives, TAMOL® 1124 dispersant is an excellent choice for the modern paint formulator.

Acconon® CC-6 is a water-soluble emollient. It is nonionic and compatible with other ionic species in formulation. It is used in personal care both as an emulsifying agent with an HLB of 12.5. This material acts as a low-irritation secondary surfactant, yet has a moisturizing effect due to its refatting properties. Acconon CC-6 is ideally suited for use in hair care and bath products where its luxurious afterfeel combined with its solubilization and emulsification properties are best employed.

ExCal® CW 325 is processed from a high purity ore to exacting specifications at our Houston, TX plant. ExCal® CW 325 is processed for use in plastics, rubber, coatings, adhesives, sealants, mastics, and other specialty applications where color, binder demand, and economics are of importance.