Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- CI Name
- CI Number
- Chemical Family
- Chemical Name
- Pigment Type
- Product Code
- MITM07250
- Single Ingredient
- Yes
- Synonyms
- Ferric Oxide Yellow
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Industrial Additives End Use
- Markets
- Applications
Properties
- Color (Properties)
- Physical Form
- Notes
- 3Iron oxide yellow pigments contain a large amount of chemically bound water that is also recorded
- 45Color values after matching of the tinting strength parameter Y, i.e. Δ L*=0
- 46similar to wet system DIN 55983:1983
- 53Minor elements may arise from the raw materials used. However, these are firmly bound to the crystal lattice as ions.
Regulatory & Compliance
- Quality Standards
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
- Protect against weathering.
- Store in a dry place and avoid extreme fluctuations in temperature.
- Close bags after use to prevent the absorption of moisture and contamination.
- If stored under the correct conditions (no climatic influence, kept dry and no extreme fluctuations in temperature) our products have an excellent shelf life.
- However, due primarily to the limited durability of the packaging, we recommend that the product is used within 5 years of the date of manufacture and our product warranty is limited to this period.
- During the first five years after the date of manufacture we are able to ensure compliance with our specification, provided the material has been stored correctly and the packaging materials remain undamaged.
Other
- Appearance (SDS)
- Powder
- Color (SDS)
- Yellow
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- None known
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Loss on Ignition 14.0 % % DIN 55913 at 1000°C, 0.5h pH 3.5-7.5 - DIN EN ISO 787-9 - Material Composition
Value Units Test Method / Conditions Iron Concentration 99.4 % % α - Iron(III) Oxide Content - Optical Properties
Value Units Test Method / Conditions Color Difference 1.5 - Delta E, Binder: Full Shade Color Intensity 95.0-105.0 % % Color Scale -1.0-1.0 CIELAB CIELAB Delta a, Binder: Test paste based on a non drying alkyd resin, Full shade Color Scale -1.0-1.0 CIELAB CIELAB Delta a, Test paste based on a non drying alkyd resin, Reduction with titanium dioxide Tronox® R-KB-2 (1 : 5) Color Scale -1.3-1.3 CIELAB CIELAB Delta b, Binder:Full shade Color Scale -1.3-1.3 CIELAB CIELAB Delta b, Binder: reduction with titanium dioxide tronox® R-KB-2 (1 : 5) Color Scale -0.3-0.5 CIELAB CIELAB delta L, binder, full shade - Physical Properties
Value Units Test Method / Conditions Apparent Tamped Density 0.3-0.7 g/mL g/mL DIN EN ISO 787-11 Density 4.0 g/mL g/mL DIN EN ISO 787-10 Moisture Content 0.5 % % DIN EN ISO 787-2 Oil Absorption 52.0 g/100g g/100g DIN EN ISO 787-5 Particle Size 0.1-0.6 µm µm Scanning Electron Microscopy (SEM) Sieve Fractionation (Retained) 0.04 % % DIN 53195 0.045 mm sieve Water Solubles 0.5 % % DIN EN ISO 787-3 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Bulk Density (SDS) 300.0-1000.0 - Melting Point (SDS) min. 1832.0 °F °F pH (SDS) 4.0-8.0 - 5% Concentration - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 5.0 -