Palmer Holland - Bayferrox 915 - Inorganic Pigments - Yellow

Enhanced TDS

Properties

Color (Properties)

Yellow

Physical Form

Powder

Notes

⁵ In iron oxide black pigments, a chemical transformation (oxidation) is also recorded when determing the loss on ignition.
⁴⁵ Color values after matching of the tinting strength parameter Y, i.e. Δ L *= 0
⁴⁶ Similar to wet system DIN 55983:1983
⁵³ Minor elements may arise from the raw materials used. However, these are firmly bound to the crystal lattice as ions.

Regulatory & Compliance

Quality Standards: ISO 9001

Packaging & Availability

Packaging Type: Bags

Principal Information

Group Principal Number: S000008
Principal: Lanxess IPG

Storage & Handling

Storage Conditions

General storage conditions:

Protect against weathering.
Store in a dry place and avoid extreme fluctuations in temperature.

Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.

Shelf life:

If stored under the correct conditions (no climatic influence, kept dry and no extreme fluctuations in temperature) our products have an excellent shelf life.
However, due primarily to the limited durability of the packaging, we recommend that the product is used within 5 years of the date of manufacture and our product warranty is limited to this period.
During the first five years after the date of manufacture we are able to ensure compliance with our specification, provided the material has been stored correctly and the packaging materials remain undamaged.

Other

Appearance

Synthetic iron hydroxide α - FeOOH powder

Appearance (SDS)

Powder

Color (SDS)

Yellow

Insoluble in (SDS)

Water

Item Number

ITM06293,

ITM21108,

ITM26228

Odor (SDS)

Odorless

Other Hazards

None known

Temperature Control

USA/DOT UN Number

Not Applicable

Chemical Properties


	Value	Units	Test Method / Conditions
Loss on Ignition	max. 13.0 %	%	DIN 55913 at 1000°C, 0.5h
pH	3.5-7.5	-	DIN EN ISO 787-9

Material Composition


	Value	Units	Test Method / Conditions
Iron Concentration	min. 99.4 %	%	α - Iron(III) Oxide Content

Optical Properties


	Value	Units	Test Method / Conditions
Color Difference	max. 1.0	-	Delta E, Binder: Full Shade
Color Difference	max. 1.7	-	Delta E, Binder: Reduction with titanium dioxide (1 : 5)
Color Intensity	95.0-105.0 %	%
Color Scale	-0.8-0.8 CIELAB	CIELAB	Internal Method Delta a, Binder, Full shade
Color Scale	-0.8-0.8 CIELAB	CIELAB	Internal Method Delta a, Reduction with Titanium dioxide Tronox® R-KB-2 (1:5)
Color Scale	-0.9-0.9 CIELAB	CIELAB	Internal Method Delta b, Binder, Full shade
Color Scale	-0.8-0.8 CIELAB	CIELAB	Internal Method delta b, reduction with Titanium Dioxide Tronox® R-KB-2 (1:5)
Color Scale	-0.8-0.8 CIELAB	CIELAB	Internal Method Delta C, Binder: Full shade
Color Scale	-0.8-0.8 CIELAB	CIELAB	Internal Method Delta C, Reduction: with titanium dioxide Tronox® R-KB-2 (1 :5)
Color Scale	-0.8-0.8 CIELAB	CIELAB	Internal Method Delta H, Binder, Full shade
Color Scale	max. 0.8 CIELAB	CIELAB	Internal Method Delta H, Reduction with titanium dioxide Tronox® R-KB-2 (1 :5)
Color Scale	-0.4-0.4 CIELAB	CIELAB	Internal Method delta L, binder, full shade

Physical Properties


	Value	Units	Test Method / Conditions
Apparent Tamped Density	0.5-0.9 g/mL	g/mL	DIN EN ISO 787-11
Density	4.0 g/mL	g/mL	DIN EN ISO 787-10
Moisture Content	max. 0.5 %	%	DIN EN ISO 787-2
Oil Absorption	32.0 g/100g	g/100g	DIN EN ISO 787-5
Particle Size	0.5 µm	µm	Scanning Electron Microscopy (SEM)
Sieve Fractionation (Retained)	max. 0.05 %	%	DIN 53195 0.045 mm sieve
Water Solubles	max. 0.5 %	%	DIN EN ISO 787-3

SDS Physical and Chemical Properties


	Value	Units	Test Method / Conditions
Decomposition Temperature (SDS)	180.0 °C	°C
Density (SDS)	4.0 g/cm³	g/cm³	at 20°C
Melting Point (SDS)	min. 1832.0 °F	°F
pH (SDS)	3.5-7.5	-	5% Concentration

Shelf Life & Stability


	Value	Units	Test Method / Conditions
Shelf Life	5.0	-

Bayferrox® 915