Enhanced TDS
Identification & Functionality
- Blend
- No
- CI Name
- CI Number
- Chemical Family
- Chemical Name
- Pigment Type
- Product Code
- MITM11217
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
Properties
- Physical Form
- Notes
- ⁵³ - Minor elements may arise from the raw materials used. However, these are firmly bound to the crystal lattice as ions.
- ⁴⁵ - Color values after matching of the tinting strength parameter Y, i.e. Δ L*=0
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Principal Information
- Group Principal Number
- S000008
- Principal
Other
- Appearance
- Red pigment powder
- Color (SDS)
- Red
- Insoluble in (SDS)
- Cold water
- Other Hazards
- None known
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Difference max. 1.0 - Delta E, Reduction with Titanium dioxide (1:5) Color Difference max. 1.0 - Internal Method Delta E, Reduction with Titanium dioxide (1:5) Color Scale -0.8-0.8 CIELAB Internal Method Delta a, Binder: Reduction with titanium dioxide (1:5) Color Scale -0.8-0.8 CIELAB Internal Method Delta a, Binder: Reduction with titanium dioxide (1:5) Color Scale -0.8-0.8 CIELAB Internal Method Delta B, binder: reduction with titanium dioxide (1 : 5) Color Scale -0.8-0.8 CIELAB Internal Method Delta B, binder: reduction with titanium dioxide (1 : 5) Color Scale -0.5-0.5 CIELAB Internal Method delta L, binder, full shade Relative Tinting Strength 95.0-105.0 % TiO₂ reduction (1:5) - Chemical Properties
Value Units Test Method / Conditions Loss on Ignition max. 4.0 % DIN 55913 at 1000°C, 0.5h pH 3.0-7.0 - DIN EN ISO 787-9 - Physical Properties
Value Units Test Method / Conditions Apparent Tamped Density 1.0 g/mL DIN EN ISO 787-11 Density 5.0 g/mL DIN EN ISO 787-10 Moisture Content max. 1.0 % DIN EN ISO 787-2 Oil Absorption 20.0 g/100g DIN EN ISO 787-5 Particle Size 0.1 µm Scanning Electron Microscopy (SEM) Sieve Fractionation (Retained) max. 0.05 % DIN EN ISO 787-7 0.045 mm sieve Water Solubles max. 0.5 % DIN EN ISO 787-3 - Material Composition
Value Units Test Method / Conditions Iron Concentration min. 98.9 % Iron(III) oxide - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Bulk Density (SDS) 1000.0 kg/m³ Density (SDS) 5.0 g/cm³ pH (SDS) 4.5-6.5 - at 5% w/w