Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Chemical Name
- Fluids & Lubricants Functions
- Function
- Anti-Microbial Agent, Microbe
- Industrial Additives Functions
- Product Code
- MITM15722
- Single Ingredient
- Yes
- Synonyms
- 2-n-Octyl-4-isothiazolin-3-one, 2-octyl-2H-isothiazol-3-one, 2-octyl-3-isothiazolinone, 2-Octyl-3-isothiazolone, 2-Octyl-3-isothioazolone, 2-Octyl-3(2H)-isothiazolone, 2-Octyl-4-isothiazolin-3-one
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Industrial Additives Features
- Labeling Claims
Applications & Uses
- Adhesive & Sealant End Applications
- Coating End Applications
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Industrial Additives End Use
- Markets
- Applications
- Product Applications
- The actual required concentration of Bioban® O 45 Antimicrobial Antimicrobial depends on several factors including: the climatic conditions where the paint will be applied, the level of desired performance, the type of paint produced, and the amount of zinc oxide in the formulation. The condition of the surface and number of coats applied are also significant.
- The level of mildew protection obtained is proportional to the amount of Bioban® O 45 Antimicrobial. Up to four pounds of Bioban® O 45 Antimicrobial per hundred gallons may be used in paints used in mildew-prone areas where humid weather conditions prevail. Lower levels - such as two pounds in a primer and one pound in a topcoat - provide satisfactory performance in dryer or cooler climates.
- When Bioban® O 45 Antimicrobial is used in conjunction with zinc oxide, which is a mildewstat, a unique performance enhancement effect on the mildew resistance of the paint occurs.
- The final selection of levels of Bioban® O 45 Antimicrobial and zinc oxide will depend on the level of protection needed as well as formulation cost. In select areas, depending on climatic and paint surface conditions, some coatings manufacturers may elect to use BIOBAN™ O 45 Antimicrobial without zinc oxide. For maximum protection in mildew prone areas (e.g., Southeastern U.S.), the formulation may require the use of zinc oxide, along with higher levels of Bioban® O 45 Antimicrobial. Advantage should be taken of this synergism to attain the best possible cost/performance
Properties
- Physical Form
Packaging & Availability
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
- For optimal shelf life, store between 20°C and 25°C (68°F and 77°F). Do not store below 1°C (34°F) or above 37°C (99°F). Bioban® O 45 Antimicrobial should be stored in original containers in a cool and shaded area.
- Bioban® O 45 Antimicrobial in original containers under appropriate storage conditions will have a shelf life of 5 years from the date of manufacture.
Other
- Appearance
- Yellow to amber liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellow
- IATA/ICAO Proper Shipping Name
- Corrosive liquid, toxic, N.O.S.
- IATA/ICAO UN Number
- UN2922
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-B
- IMO/IMDG Proper Shipping Name
- Corrosive liquid, toxic, N.O.S.
- IMO/IMDG UN Number
- UN2922
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- None known
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT Emergency Response Guide Number
- 154
- USA/DOT Proper Shipping Name
- Corrosive liquids, toxic, N.O.S.
- USA/DOT UN Number
- UN2922
- Chemical Properties
Value Units Test Method / Conditions pH 2.4 - 10% Solution - Material Composition
Value Units Test Method / Conditions 2-n-octyl-4-isothiazolin-3-one Content 45.0 % % Active Content min. 45.0 % % Propylene Glycol Content 53.0-55.0 % % - Physical Properties
Value Units Test Method / Conditions Boiling Point 188.0 °C °C at 760mm Hg Density 8.5-8.7 lb/gal lb/gal Flash Point 93.0 °C °C Melting Point max. -20.0 °C °C Specific Gravity 1.034 - Water = 1 Storage Temperature 34.0-99.0 °F °F Viscosity 40.0 cPs cPs Brookfield Viscometer at 20°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 370.0 °F °F Density (SDS) 1.02 g/cm³ g/cm³ at 20°C Evaporation Rate (SDS) max. 1.0 - Flash Point (SDS) min. 221.0 °F °F Closed Cup Flash Point (SDS) min. 221.0 °F °F Pensky-Martens Closed Cup (PMCC) Ignition Temperature (SDS) 700.0 °F °F Solvent Log Partition Coefficient (Log Pow) (SDS) 2.45 - at 24°C, n-octanol/water, Log pow Lower Explosion Limit (SDS) 2.6 - Propylene Glycol Melting Point (SDS) max. -20.0 °F °F Relative Vapor Density (SDS) min. 1.0 - Upper Explosion Limit (SDS) 12.5 - Propylene Glycol Vapor Pressure (SDS) 0.1 - propylene glycol Viscosity (SDS) 40.0 - Brookfield Viscometer at 20°C pH (SDS) 2.4 - 10% Concentration - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 5.0 -