Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Code
- MITM10825
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Key Features and Benefits
- Product Features:
- Withstands ambient temperatures of over 260°C
- Remains flexible over temperature range of -40°C to over 260°C
- One component, supplied ready for use
- Fast-drying and curing system
- Product Benefits:
- Design flexibility for performing under harsh temperatures; cost-effective multiple applications
- Controlled dry film thickness free of cracks providing controlled electrical properties, reducing scrap and rework
- Easy handling; reduces chances for error and increases yield of usable product
- Reduced energy costs; faster production rates for increased productivity and equipment utilization
- Product Features:
Applications & Uses
- Application Area
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Application and Usage Information
- Product Application:
- Chemically resistant conductive coating
- Flexible charge-distributing coating
- Heat generating coatings
- Cable coating
- Impregnating paint
- Thick film resistance networks
- Electrostatic bleed of plastics, rubber, including epoxy electrical bushings
- Usage Information:
- Surface Preparation
- For maximum adhesion, all surfaces must be dry and free of contaminants, such as oil or chemical residues before applying BONDERITE® S-FN T-502. Porcelains and other smooth substrates can be wiped with a solvent such as acetone, and then allowed to air dry. Porous substrates should be heated sufficiently after the solvent wipe to drive off any entrapped contaminants, solvents, and moisture. Mixing and Dilution
- BONDERITE® S-FN T-502 is supplied ready for use, if applied by brush. Dip and spray methods may require dilution with a solvent.
- Using a mechanical stirrer or paint shaker, mix BONDERITE® S-FN T-502 thoroughly until it is of uniform consistency. Check to see that no sediment remains on the bottom of the container. Pour into suitable container for dilution (i.e., pressure pot, etc.). BONDERITE® S-FN T-502 as supplied is ready for brush, dip or roller coat application.
- For spray application, BONDERITE® S-FN T-502 should be diluted, prior to use. A suggested starting point is one part product to two parts MEK by volume.
- Application
- For small production work and prototypes, a suction cup gun may be used, as long as BONDERITE® S-FN T-502 is thoroughly mixed prior to spray application. For intermediate production runs or many small parts, a propeller-type stirrer should be used in the suction gun to ensure coating uniformity. Full production is best handled with propeller-agitated pressure pot systems, as this provides the best in application efficiency. The electrical resistance of BONDERITE® S-FN T-502 can be adjusted by controlling the film thickness. BONDERITE® S-FN T-502 can also be blended with Dag 503 (silver) to achieve various resistance values.
- Note: Handle BONDERITE® S-FN T-502as you would a quality automotive lacquer. AVOID DRY SPRAY, as this will cause poor adhesion. To reduce overspray, use the minimum atomization pressure required for adequate coverage.
- Curing
- Air drying of the product is adequate for most applications. To assure complete solvent loss, the coating can be baked for 15 minutes at 150°C.
- Surface Preparation
- Product Application:
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000218
- Principal
Storage & Handling
- Storage and Shelf Life Information
- Shelf life for this product is 2 years from date of qualification under original seal. Keep container tightly closed when not in use. Store in a cool, well ventilated area. Empty containers may retain hazardous properties.
Other
- Color (SDS)
- Black
- IATA/ICAO Proper Shipping Name
- Ethyl methyl ketone
- IATA/ICAO UN Number
- UN 1193
- IMO/IMDG Proper Shipping Name
- Ethyl methyl ketone
- IMO/IMDG UN Number
- UN 1193
- Item Number
- Odor (SDS)
- Ketone
- Protect from Freezing
- Yes
- USA/DOT Proper Shipping Name
- Ethyl methyl ketone
- USA/DOT UN Number
- UN1193
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr yr - Physical Properties
Value Units Test Method / Conditions Coverage 7.87 m²/kg m²/kg at 25 μm, wet product Density 0.87 kg/L kg/L Flash Point -5.0 °C °C Storage Temperature 32.0-89.6 °F °F Viscosity 400.0-800.0 mPa.s mPa.s of wet product - Material Composition
Value Units Test Method / Conditions Solid Content 13.0 % % of wet product Volatile Organic Compounds (VOC) 755.0 g/L g/L of wet product - Application Information
Value Units Test Method / Conditions Application Temperature max. 275.0 °C °C continuous, of wet product - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 80.0 °C °C Flash Point (SDS) -5.0 °C °C Tagliabue Closed Cup Melting Point (SDS) -86.1 °C °C Specific Gravity (SDS) 0.869 - Vapor Pressure (SDS) 70.0 mm Hg mm Hg Viscosity (SDS) 400.0-800.0 mPa.s mPa.s Volatile Organic Content (VOC) (SDS) 755.0 g/L g/L