Products

BONDERITE® S-FN T-502 is a combination of specialty processed carbon particles in a fluoroelastomer resin system designed to provide high resistance values. In its cured form, it exhibits both high and low temperature flexibility and moisture resistance. These benefits, when coupled with ease of application and long shelf life, make the product adaptable to a wide variety of uses. This product may also be mixed with other Dag® products to provide a wide resistance range.

BONDERITE® S-FN 8301 is designed for lubricant applications where environmental regulations restrict emissions of VOC (Volatile Organic Compounds). BONDERITE® S-FN 8301 provides good wear, low coefficient of friction, solvent resistance, and resistance to chalking in UV exposure. After dip or spray application, BONDERITE® S-FN 8301 can be either air dried or forced dried with heat. This superior coating material offers lifetime lubrication for heat-sensitive substrates, complex machined precision steel parts, light metals (copper, aluminum), and some non-metallic materials.

BONDERITE® S-FN 330 ACHESON offers clean, dry, long lasting, solvent resistant lubrication for sliding, rubbing or rolling surfaces. BONDERITE® S-FN 330 ACHESON is a resin-bonded PTFE lubricant supplied as one component in ready-for-use form. Its low temperature cure of 50°C (300°F) does not affect heat-sensitive substrates such as light metals, wood, rubber and some plastics. The extremely thin coating of BONDERITE® S-FN 330 ACHESON necessary to achieve maximum lubrication (from 0.0003 to 0.0007 inch, or 0.008 to 0.018 millimeter) allows post-treatment of parts while maintaining original part dimensions without redesign. In many cases, BONDERITE® S-FN 330 ACHESON coating can replace metal plating or finishing and offers improved performance at lower cost.

BONDERITE® L-FG 137 is specifically formulated to provide a superior lubricating and release film for high temperature applications. Its unique particle size and binder system combine to promote a tenacious graphite film for maximum protection against galling, soldering and seizing.

BONDERITE® L-GP M 208 is a high solids molybdenum disulfide additive in petroleum oil. It is specially formulated to provide an easy and economical method of fortifying greases and heavy oils with MoS2. The fine particles in this dispersion permit fully effective coverage at much lower solids contents than are required with MoS2 powder. This property also extends the range of application of finished lubricants to other industrial uses which require the benefits of solid film lubrication, but may be somewhat intolerant of coarse solid additives.

BONDERITE® L-GP 2404 is a high quality lubricant additive consisting of superfine graphite particles in mineral spirits. Lubricants diluted with BONDERITE® L-GP 2404 ACHESON (known as Dag 2404) are able to form a highly effective graphite film on metal surfaces at temperatures up to 482°C (900°F). It is particularly successful in conveyor chain operation because it penetrates and forms a solid lubricating film over the entire bearing surface as the carrier vaporizes.

BONDERITE® S-FN 213 ACHESON is designed to provide controlled electrical resistance properties. BONDERITE® S-FN 213 ACHESON is a dispersion of finely divided graphite pigment in an epoxy resin solution. When properly cured, it has excellent adhesion to epoxy circuit boards, bushings, plastics and ceramics. BONDERITE® S-FN 213 ACHESON also has excellent wearing properties. It provides chemical resistance to oils and many solvents, but not to enamel strippers. BONDERITE® S-FN 213 ACHESON as a lubricant coating provides clean, dry, long-wearing, and superior maintenance-free lubrication for a wide range of light to medium load applications. A thin film of BONDERITE® S-FN 213 ACHESON keeps wear uniform and reduces friction on mating metal parts without requiring increased manufacturing tolerances. Components are protected from metal-to-metal contact even in applications approaching boundary lubrication, reducing the risk of damage due to partial or complete seizure. Formulated from processed micro-graphite and epoxy resin, BONDERITE® S-FN 213 ACHESON forms tightly adherent coatings on many types of substrates. In addition to high lubricity, BONDERITE® S-FN 213 ACHESON coatings exhibit extremely good wear resistance to oils and solvents (except enamel strippers).

BONDERITE® L-CA PF 404 ACHESON (known as PF 404) is a blend of ultra-fine graphite particles dispersed in a water-extendible solution. Specifically designed for continuous casting, BONDERITE® L-CA PF 404 ACHESON (known as PF 404) provides excellent release, superior tooling protection and high temperature wetting characteristics on copper/bronze dam blocks. Its unique formulation minimizes gassing which compounds porosity levels. BONDERITE® L-CA PF 404 ACHESON (known as PF 404) does not build up and is easily washed from the dam block surface.

BONDERITE® S-AD 1286 ACHESON is a stable dispersion of uniform, microscopic molybdenum disulfide particles in a highly refined petroleum oil concentrate. It is designed for use in formulating automotive and industrial lubricants. BONDERITE® S-AD 1286 ACHESON significantly reduces friction and improves the extreme pressure, load carrying, and anti-wear properties of lubricants. It prevents metal-to-metal contact and surface scuffing and provides reliable lubrication in boundary conditions.

BONDERITE® S-FN 333 is a blend of fluorocarbon lubricants in an organic resin binder and solvent system designed for applications beyond the scope of conventional fluorocarbon coatings. Its low coefficient of friction, hardness, adhesion, resiliency, and cure conditions allow application of BONDERITE® S-FN 333 in a multitude of places where pure sintered PTFE coatings are unsuitable. Coatings of BONDERITE® S-FN 333 wear longer than pure PTFE, offer superior chemical resistance, and can be repaired without removing the existing coating. BONDERITE® S-FN 333 combines the toughness of the support resin with the surface properties of pure PTFE.

BONDERITE® L-GP 154, a specially processed colloidal graphite dry film lubricant, air dries rapidly at room temperature and adheres tenaciously to most substrates with minimum surface preparation. The thinness of the coating, coupled with high lubricity, provides clean, long wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush, or dip techniques. BONDERITE L-GP 154 ACHESON is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics. BONDERITE L-GP 154 ACHESON has been specified throughout the electronics industry in a multitude of roles. It can easily be blended with BONDERITE L-GP M 210 ACHESON (molybdenum disulfide insulating coating) to attain cost-effective sheet resistance variations.

BONDERITE® S-AD 197 is a concentrated dispersion of extremely high purity colloidal graphite in a water-insoluble polyalkalene glycol. It provides superior fluid lubrication in extreme temperature, high stress environments that carbonize petroleum oils. If temperatures rise to the point that the polyalkalene glycol volatilizes, an adherent film of graphite remains on the wear surface to maintain a low coefficient of friction and prevent metal-to-metal contact. BONDERITE® S-AD 197 is specially formulated and unequaled in its ability to resist settling out.

BONDERITE® S-FN EB-012 ACHESON is one in a series of conductive coatings designed to provide controlled electrical properties. BONDERITE® S-FN EB-012 ACHESON is an application versatile, single component, water based dispersion of graphite in a thermoplastic binder that offers an extremely flexible coating with low resistance at a low cure temperature. The coating will provide a conductive, chemical-resistant coating that will withstand the environment inside of a lithium-ion polymer battery. With proper dilution, BONDERITE® S-FN EB-012 ACHESON can be applied by spray, brush, roll, or print methods. Once properly cured, the coating provides a tenacious, chemical and solvent resistant coating for most metal substrates.

BONDERITE® L-GP 2420 is a stable suspension of superfine graphite particles in an odorless aliphatic hydrocarbon. This material penetrates and dries quickly to form a tenacious graphite lubricating and protective dry film. BONDERITE L-GP 2420 ACHESON (known as DAG 2420) resists abrasion and reduces friction and wear while providing non-seizure, trouble-free operation in a variety of applications. It has exceptional performance in bakery oven and conveyor chain operation due to the low residue buildup left by the fluid component.