Products

EBECRYL® 3708 is a modified bisphenol A epoxy diacrylate that exhibits relatively low viscosity and good cure response. Films of EBECRYL® 3708 cured by ultra- violet light (UV) or electron beam (EB) demonstrate good flexibility, high gloss, toughness, and superior impact resistance.

D.E.H.® 20 Epoxy Curing Agent is an economical, liquid diethylenetriamine (DETA) aliphatic polyamine hardener that provides a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. D.E.H.® 20 Epoxy Curing Agent is used for civil engineering applications, maintenance paints, and in the manufacture of epoxy-amine adducts. It is also used in adhesives, epoxy composite applications and as an accelerator for polyamide curing agents. In electrical applications, D.E.H.® 20 Epoxy Curing Agent is used for casting, potting and encapsulation.

EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. EBECRYL® 896 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.

RHOPLEX® WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) of RHOPLEX® WL-100 accommodates a broad range of formulation types and formulation process techniques, providing the formulator with a versatile binder for a variety of applications. Robustness, along with 50% weight solids, allows the formulator to achieve volume solids above conventional waterborne binders.

AP 1562 LT is a low viscosity, reactive, Phenalkamine epoxy hardener solution for epoxy resins based lacquers and coatings.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

LOTADER® 4513T is a random ethylene-methyl acrylate-maleic anhydride terpolymer. Versatile ready-to-use tie layer resin for extrusion lamination/coating, not intended to be diluted. Provides excellent adhesion in direct bonding onto printed, reverse-printed and plain films (OPET, OPP, CPP, OPA) while having a good processability in extrusion coating and lamination onto foil, metallized films, paper and board.

EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing.

RHOPLEX® 2601 is a versatile binder designed for interior and exterior coatings and can be formulated across a broad PVC range. For exterior durability, higher coalescent levels may be needed to ensure good film formation in higher PVC paints. While RHOPLEX® 2601 is a harder latex binder, it should be noted that it is possible to develop low VOC paints with the use of low VOC coalescents (i.e. DOWANOL™ LoV 485 Glycol Ether, Optifilm 400, etc.).

Polycin® GR-160 is a 100% solids, castor oil based derivative designed for use as a primary polyol or reactive diluent in polyurethane sealants and adhesives systems. Polycin® GR-160 imparts medium hardness and provides VOC reduction while offering the beneficial properties of castor oil derivatives, such as improved flow and leveling.

Polycin® M-280 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® M-280 will impart higher hardness and strength, and as a reactive diluent, Polycin® M-280 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics.

VANCRYL® 927 is a medium glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss can be obtained by utilizing VANCRYL® 927 in inks and coatings. Its film formation properties, coupled with its rapid water release, result in very fast drying. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 927 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with VANCRYL® 927 have good transfer, printability, and resolubility for high-quality printing on various paper substrates (including metalized paper) and aluminum foil. VANCRYL® 927 can also be formulated as a high gloss OPV that will very quickly develop water, oil, and scuff resistance.

EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.