Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Product Code
- MITM15349
- Single Ingredient
- Yes
- Technologies
- Product Families
Applications & Uses
- Applicable Processes
- Base Chemicals End Uses
- Compatible Polymers & Resins
- Markets
- Applications
Properties
- Physical Form
- Soluble In
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002297
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
Sheltered and temperature-controlled storage conditions (temperature <25°C). No stacking of pallets. Remove the plastic film protection after transport once in good storage conditions. 6 months. As this product is sensible to gradual oxidation and to compaction, appropriate storage and a strict inventory control is to be followed (oldest material used first), especially during hot periods. Be aware that temperature, time and pressure is of influence on the re-massing phenomena.
Other
- ADR/RID/ADN Proper Shipping Name
- Not Applicable
- ADR/RID/ADN UN Number
- Not Applicable
- Color (SDS)
- Yellow
- Explosive Nature (SDS)
- Not explosive
- Flammability (SDS)
- Not classified inflammable
- Flammable Nature (SDS)
- Not classified inflammable
- Item Number
- Odor (SDS)
- Light
- Other Hazards
- Fine particles and powder may cause skin irritation by mechanical abrasion. However, based on available data, the classification criteria are not met.Fine particles and powder may cause eye irritation by mechanical abrasion. However, based on available data, the classification criteria are not met.Inhalation (dust or vapours/fumes generated by heated products) may cause respiratory irritation with throat discomfort, coughing or breathing difficulty.Hot molten product: Burns may cause irreversible eye injury and blindness. Causes skin burns, Resin dust may ignite on contact with electrostatic discharge or exposure to flame or other sources of ignition. Hot molten product: may burn if ignited.
- Oxidizing Properties (SDS)
- Non oxidising
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Color Scale 7.0 Gardner Gardner 50 resin / 50 toluene - Chemical Properties
Value Units Test Method / Conditions Acid Number 8.0 mg KOH/g mg KOH/g - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 1.08 g/cm³ g/cm³ At 20°C Flash Point min. 200.0 °C °C Softening Point 105.0 °C °C Ring and Ball Test - Material Composition
Value Units Test Method / Conditions Renewable Content 100.0 % % ASTM D6866-21b - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 391.0 °C °C Regulation (EC) No. 440/2008, Annex, A.10 Boiling Point (SDS) 393.0-450.0 °C °C OECD 103 Flash Point (SDS) min. 200.0 °C °C Regulation (EC) No. 440/2008, Annex, A.9 Flash Point (SDS) min. 200.0 °C °C Closed Cup Log Partition Coefficient (Log Pow) (SDS) min. 6.5 - OECD 117 n-Octanol/Water Relative Density (SDS) 1.08 - OECD 109 at 20°C Softening Point (SDS) 105.0 °C °C ASTM E28 Vapor Pressure (SDS) max. 0.003 Pa Pa OECD 104 at 25°C