Products

ALUMINIUM ALLOY POWDER SCALMA40B5 is an odourless light grey material which is available in a range of sizes up to 1mm. Above this, the product is usually referred to as granulate. It is produced commercially by atomizing molten aluminium using air or inert gas. Our products are available in a range of sizes, the first grade commercially available has a median size of 1 micron. And all aluminiuim powder is made from minimum 99.85% purity aluminium ingot.

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

CARPOL® TEAP-265 is a triethanolamine-initiated polyether polyol. The resultant material has a nominal functionality of three and a typical hydroxyl number of 635. This polyol’s functionality and short-chained nature make it optimal for use in rigid foam. Primarily used as a rigid polyol modifier, CARPOL® TEAP-265 can be used to cut the high viscosity seen with most sucrose based rigid polyols while acting as a good crosslinker. In addition, this polyol contains amine which enhances the overall system reactivity.

WANNATE® HB-200 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

CALCIUM STEARATE/ZINC STEARATE 11 BUSA is a high bulk density, free flowing granular powder.

MAGNESIUM STEARATE SW/F/1 VEG - US is a low to medium bulk density, fine white powder.

Silcolapse® 454 is a compound containing polydimethylsiloxane oil and a mineral filler in colloidal dispersion. It is intended mainly for treating anhydrous media, but also aqueous media, in numerous industries (oil, crop protection products, detergents, chemicals, etc.). Its excellent behaviour in alkaline media and its efficiency in a wide range applications are of interest. Silcolapse® 454 is intended for industrial use only, and it should not be used in the manufacture of foodstuffs, cosmetics or pharmaceutical products.

ExCal® CW 325 is processed from a high purity ore to exacting specifications at our Houston, TX plant. ExCal® CW 325 is processed for use in plastics, rubber, coatings, adhesives, sealants, mastics, and other specialty applications where color, binder demand, and economics are of importance.

SURFONIC® N-95 is the 9.5-mole ethoxylate of nonylphenol. It is a water soluble, nonionic surface-active agent which is compatible with other nonionic surfactants and with most anionic and cationic surfactants.

Pale 4 polymerized castor oil oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents. Pale 4 polymerized castor oil is used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. It is a processing aid and plasticizer for rubber polymers.

Toyal 201 is a medium, conventional air atomized aluminum powder.

Toyal 233 is used in ceramics and refractory, and fluids and lubricants markets.

Baerolub® L-ED is a polyol ester (POE) used as an internal lubricant and release agent in the processing of polyvinyl chloride (PVC). It is particularly suitable for applications involving films, profiles, and sheets, both for indoor and outdoor uses. This product is known for its low volatility and outstanding weatherability, making it ideal for applications requiring long-lasting performance and durability.

CA/ZN-STEARATE 5050 is a low bulk density, fine white powder.

CALCIUM STEARATE GP 200 5932 is a low to medium bulk density, fine white powder.