Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Function
- Adhesion Promoter, Coupling Agent
- Product Code
- MITM09641
- RTU Product Type
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Ready-to-Use Product Features
- Key Features
- Excellent adhesion properties
- Improves adhesion to polar substrate in hot melt formulations
- Easy to handle, emulsifiable in open vessel
Applications & Uses
- Adhesive & Sealant End Applications
- Product End Uses
- Product Applications
- Licocene PP MA 1332 granules TP is a maleic anhydride grafted, metallocene catalyzed polypropylene wax. The excellent adhesion and compatibility makes the Licocene PP MA 1332 granules TP a perfect fit for fiber coatings where it acts as an adhesion promoter and coupling agent.
- Due to it ́s low drop point it can be emulsified without pressure. Emulsified, it shows excellent anti slip properties in floor care and it can also be used as a coating for corrosion protection.
- Used in hot melt formulations, Licocene PP MA 1332 granules TP offers improved adhesion to polar substrates.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Principal Information
- Group Principal Number
- S000004
- Principal
Storage & Handling
- Storage Conditions
- For best shelf life store this product in a dry area at normal ambient temperatures.
- Minimum shelf life is 2 years from the date of shipping when properly stored.
Other
- Appearance
- Yellowish granules
- Appearance (SDS)
- Granular
- Color (SDS)
- Light yellow
- Explosive Nature (SDS)
- Not explosive
- Insoluble in (SDS)
- Water
- Oxidizing Properties (SDS)
- Not oxidizing
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Value 18.0 mg KOH/g - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr - Physical Properties
Value Units Test Method / Conditions Drop Point 88.0 °C ASTM D3954 Viscosity 240.0 mPa.s Internal Method at 170°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Burning Number (SDS) 2.0 - short flaring up without spreading Decomposition Temperature (SDS) 572.0 °F Density (SDS) 0.88 g/cm³ at 73°F Drop Point (SDS) approx. 190.0 °F ASTM D3954 Flash Point (SDS) 248.0 °C SetaFlash Closed Cup Viscosity (SDS) 240.0 mPa.s at 170°C