Enhanced TDS
Identification & Functionality
- Additives Included
- Blend
- Yes
- Chemical Family
- Product Code
- MITM09823
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Plastics & Elastomers Processing Methods
- Product Applications
- Permanent antistactic additive for PMMA matrices.
- Breathable membranes.
- Processing Information
- Typical melt temperature (Min / Recommended / Max): 200°C / 240°C / 270°C.
- Typical mold temperature: 25–60°C.
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 65-75°C.
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000003
- Principal
Other
- Color (SDS)
- Translucent
- Insoluble in (SDS)
- Most organic solvents
- Item Number
- Other Hazards
- Processing may release vapors and/or fumes which cause eye, skin and respiratory tract irritation, The product, in the form supplied, is not anticipated to produce significant adverse human health effects. Contains polymer(s). Effects due to processing releases: Irritating to eyes, respiratory system and skin. Prolonged or repeated exposure may cause: headache, drowsiness, nausea, weakness. (severity of effects depends on extent of exposure), Handle in accordance with good industrial hygiene and safety practice. (pellets/granules) This product may release fume and/or vapor of variable composition depending on processing time and temperature.
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr yr - Electrical Properties
Value Units Test Method / Conditions Surface Resistance 100000000.0 Ω Ω IEC 60093 condensed Volume Resistivity 100000000.0 Ω-cm Ω-cm IEC 60093 condensed Volume Resistivity 100000000.0 Ω-cm Ω-cm IEC 60093 dry basis - Mechanical Properties
Value Units Test Method / Conditions Hardness 30.0 Shore D Shore D at 15 secs, dry Hardness 30.0 Shore A Shore A ISO 7619-1 at 15 secs, dry Strain at Break min. 300.0 % % ISO 527-1 dry, thermoplastic elastomer, at break Strain at Break min. 50.0 % % ISO 527-2 at break, condensed Stress 7.0 MPa MPa ISO 527-2 condensed, at 50% strain Stress at Break 16.0 MPa MPa ISO 527-1 dry, thermoplastic elastomer, at break Tensile Modulus 59.0 MPa MPa ISO 527-2 condensed - Physical Properties
Value Units Test Method / Conditions Density 1010.0 kg/m³ kg/m³ ISO 1183 dry basis Humidity Absorption 2.5 % % ISO 62 dry basis Melting Point 150.0 °C °C ISO 11357-1 at 10°C/min Water Absorption 20.0 % % ISO 62 dry basis - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) 572.0-662.0 °F °F Melting Point (SDS) 338.0 °F °F