Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Plastics & Elastomers Functions
- Product Code
- MITM10616
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Compatible Polymers & Resins
- Cure Method
- Plastics & Elastomers End Uses
Properties
- Physical Form
Safety & Health
- Safety Information
- Polyurethane products manufactured or produced from this liquid system may represent a serious fire hazard if improperly used or allowed to remain exposed or unprotected.
- The character and magnitude of any such hazard will depend upon a broad range of factors which are controlled and influenced by the manufacturing and production process, by the mode of application or installation, and by the function and usage of the particular product.
- Any flammability rating contained in this literature is not intended to reflect hazards presented by this or any other material under actual fire conditions.
- These ratings are used solely to measure and describe the products response to heat and flame under controlled laboratory conditions.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S001809
- Principal
Storage & Handling
- Storage Conditions
- Shelf life dependent on storage conditions.
- Components should be stored in tightly capped containers with nitrogen blanketed head-space.
- Components should be stored in a temperature controlled environment of approximately 75°F.
- Avoid extreme temperatures and significant changes in temperature.
Other
- Appearance (SDS)
- Yellow
- Item Number
- Odor (SDS)
- Slight musty odor
- Other Hazards
- Onset of symptoms may be delayed, Refer to Section 11 Toxicological Information for additional toxicity information, Refer to Section 16 Other Information for HMIS and NFPA Codes.
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S. (methylene diphenyl diisocyanate)
- USA/DOT UN Number
- UN3082
- Material Composition
Value Units Test Method / Conditions Isocyanate Group Content 17.5-18.5 % % - Physical Properties
Value Units Test Method / Conditions Specific Gravity 1.11 - at 77°F Storage Temperature 60.0-80.0 °F °F Viscosity max. 600.0 cPs cPs At 77°F - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 200.0 °C °C at 5 mmHg Flash Point (SDS) min. 200.0 °F °F Pensky-Martens Closed Cup (PMCC) Specific Gravity (SDS) 1.08-1.14 - water=1 - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 6.0 -