Palmer Holland - POLYGLYKOL B 11/100

Base oil component for high performance lubricants with low friction coefficients, excellent wear properties, and good thermal stability.
Lubricant for high pressure compressors.
Water soluble, lubricating component of metalworking fluids.
Component of auxiliaries for leather and textile processing.
Defoamer for food and non-food applications.
Reactive alcohol component in chemical reactions.
Solvent and humectants for dyes and inks.
Heat transfer medium.
Conveyor lubricants.

To increase the stability against thermo oxidative degradation, Lubricant Additive 1655 can be used.

Properties

Physical Form

Soluble In

Note

Typical Properties are for guidance only and not to be taken as product specifications. The tolerances are given in the product specification sheet.

Note:

¹ - n:m = 1:1.

Product Properties

POLYGLYKOL B 11/100 is a clear neutral viscous liquid at room temperature. POLYGLYKOL B 11/100 is soluble in water and polar organic solvents like acetone or methanol at room temperature. POLYGLYKOL B 11/100 is insoluble in pure hydrocarbons.
POLYGLYKOL B 11/100 displays a very low solidification point of –45°C and no evaporation loss even at temperatures as high as 100°C. The hygroscopy of polyglycols increase with the EO ratio in the polymer.
Polyglykol B 11/100 is also acceptable as an ingredient for the use in lubricants with incidental food contact (HX-1) for use in and around food processing areas according to NSF.

Packaging & Availability

Packaging Type: Totes (IBC)

Principal Information

Group Principal Number: S000004
Principal: Clariant Industrial Applications

Storage & Handling

Storage Conditions: When stored in a cold, dry place in a closed container POLYGLYKOL B 11/100 can be kept for at least two years.

Other

Appearance

Clear viscous liquid

Appearance (SDS)

Liquid

Color (SDS)

Colorless to slight yellow

Item Number

ITM24364

Odor (SDS)

Characteristic

Other Hazards

None known

Temperature Control

USA/DOT UN Number

Not Applicable

Chemical Properties


	Value	Units	Test Method / Conditions
pH	5.0-7.0	-	10% w/w solution in water

Material Composition


	Value	Units	Test Method / Conditions
Sodium Content	max. 10.0 ppm	ppm

Mechanical Properties


	Value	Units	Test Method / Conditions
Scar Diameter	0.65	-	DIN 51350
Weld Load	1300.0 N	N

Optical Properties


	Value	Units	Test Method / Conditions
Color Scale	max. 50.0 APHA	APHA
Refractive Index	1.456-1.46	-	DIN 51432 at 20°C

Physical Properties


	Value	Units	Test Method / Conditions
Cloud Point	50.0 °C	°C
Density	1.04-1.05 g/cm³	g/cm³	DIN 51757 at 20°C
Flash Point	250.0 °C	°C	DIN 51794
Molecular Weight	1850.0 g/mol	g/mol
Pour Point	-45.0 °C	°C	ISO 3016 1% aqueous solution
Viscosity	121.0 mm²/s	mm²/s	DIN 51562 at 40°C
Viscosity Index	232.0	-	ASTM D2270

SDS Physical and Chemical Properties


	Value	Units	Test Method / Conditions
Autoignition Temperature (SDS)	689.0 °F	°F	DIN 51794
Decomposition Temperature (SDS)	min. 662.0 °F	°F	Differential Scanning Calorimetry heating rate 376.15 K/min
Density (SDS)	1.04 g/cm³	g/cm³	DIN 51757 at 20°C
Density (SDS)	1.018 g/cm³	g/cm³	DIN 51757 at 50°C
Flash Point (SDS)	482.0 °F	°F	DIN 51376
Kinematic Viscosity (SDS)	100.0	-	DIN 51562 at 50°C
Log Partition Coefficient (Log Pow) (SDS)	max. -1.0	-	Log Pow, n-Octanol/Water
Molecular Weight (SDS)	1890.0 g/mol	g/mol
Solidification Point (SDS)	max. -45.0 °C	°C	ISO 3016
Solidification Point (SDS)	max. -45.0 °C	°C	ISO 3016 at -49°F
Vapor Pressure (SDS)	max. 0.1 mbar	mbar	At 20°C
pH (SDS)	5.0-7.0	-	DIN 19268 at 20°C, concentration 100 g/l

Shelf Life & Stability


	Value	Units	Test Method / Conditions
Shelf Life	2.0	-

Thermal Properties


	Value	Units	Test Method / Conditions
Ignition Temperature	360.0 °C	°C	DIN 51794 300N, 1 hr