SURFYNOL® DF-220

SURFYNOL® DF-220 is an effective defoamer concentrate based on mineraloil /waxtechnology. Silicone-freeand contains no fumed silica.

Principal: Evonik Corporation Coating Additives

Functions: Defoamer

Chemical Family: Acetylenics, Diols

End Uses: Floor Coatings, Waterborne Coating

Labeling Claims: Biocides-free, Conflict Minerals-free, Not Listed In California Proposition 65, Silicone-free

View All Documents

Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Chemical Family
Country of Origin
Function
Defoamer
Product Code
MITM11625
Technologies
Product Families

Features & Benefits

CASE Ingredients Features
Labeling Claims
Product Benefits
  • Based on mineral oil with good long-lasting defoaming effect
  • Long-term sustained defoaming
  • Suitable for medium- to high-PVC formulations

Applications & Uses

Application Method
Coating End Applications
Markets
Applications
Product Applications
  • Architectural paints
  • Printing Inks
Processing Information

Can be introduced in the grind and let-down stage.

Properties

Regulatory & Compliance

Packaging & Availability

Packaging Type

Principal Information

Group Principal Number
S000006
Principal

Storage & Handling

Storage Conditions
  • The recommended storage temperature for SURFYNOL® DF-220 defoamer is between 20-30°C.
  • If freezing (white precipitation)occurs, the product should be warmed to approximately 25-40°C and mixed thoroughly to restore it toa homogeneous, clear, pale yellow liquid.
  • This should not adversely affect the product’s performance.
  • However, prolonged storage at temperatures above 30°C should be avoided, as this will shorten the shelf life of the product.

Other

Appearance
Clear colored liquid
Color (SDS)
Pale yellow
Insoluble in (SDS)
Water
Item Number
Odor (SDS)
Hydrocarbon like
Other Hazards
None
USA/DOT Emergency Response Guide Number
128
USA/DOT Proper Shipping Name
Combustible liquid, N.O.S. (distillates (petroleum), hydrotreated light)
USA/DOT UN Number
NA 1993
Material Composition
ValueUnitsTest Method / Conditions
Active Content100.0%
Application Information
ValueUnitsTest Method / Conditions
Dosage (Use Level)0.1-1.0%
SDS Physical and Chemical Properties
ValueUnitsTest Method / Conditions
Boiling Point (SDS)270.0°F
Density (SDS)0.829-0.833g/cm³At 104°F
Flash Point (SDS)198.0°F
Kinematic Viscosity (SDS)6.7-6.84mm²/sDIN 53015 at 40°C
Specific Gravity (SDS)0.84-
Vapor Pressure (SDS)3.46hPa
Viscosity (SDS)5.6-5.7mPa.sDIN 53015 at 40°C