Products

SUKOREZ® SU-100S is a water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

SUKOREZ® NX-710 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as metallocene catalyzed polyolefin(me-PO), ethylene vinyl acetate(EVA), styrene block copolymer(SBC) and amorphous polyalphaolefin(APAO).

AIRASE® 5700 is a very compatible defoamer concentrate based on polyether siloxane technology. Contains fumed silica.

ACEMATT® OK 630 is a wax-treated, medium particle-sized precipitated silica. By offering very high compatibility, it can be used in a large variety of coatings.

EBECRYL® 8604 is an aliphatic urethane tetraacrylate. As the main resin, EBECRYL 8604 offers excellent reactivity combined with good hardness and toughness. As a co-resin, EBECRYL 8604 blended with higher functional (penta or greater) oligomer(s) improves reactivity and weatherability while increasing the ductility with minimum impact surface hardness. Films of EBECRYL 8604 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, hardness, and excellent exterior durability.

EBECRYL® 1710 is an acrylic polymer diluted 60% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). EBECRYL® 1710 is used as the primary or a modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to improve film properties such as adhesion and lay-down.

TEGO® Rad 2300 is an efficient non-foaming, radically cross-linkable substrate wetting and slip additive. Recommended even for high shear applications and the wetting of low energy substrates including fresh litho inks.

VANCRYL® 450 is a high solids colloidal dispersion that can be neutralized with ammonia or other alkaline materials to provide an outstanding vehicle for corrugated printing ink applications. VANCRYL® 450, at 40% solids, reduces the cost in ink systems based on pre-neutralized colloidal acrylics. VANCRYL® 450 exhibits excellent black pigment grinding, and high drink in corrugated systems. This polymer, when neutralized with ammonia at 10% solids in water, has a viscosity of 150 cP, or about 40 seconds on a # 2 Zahn cup. It provides excellent transfer and printing at this low, economical solids level. Neutralization can be easily accomplished by a simple mixing of 100 parts polymer wet, 95 parts water, and 5 parts ammonia. This mixture produces a 20% solids colloidal emulsion with a viscosity of 6000 to 9000 cP. It can be used in black pigment dispersions as well as color letdowns for corrugated inks. VANCRYL® 450 is also an effective thickener for other formulations based on acrylic and styrenated acrylic polymers.

TEGO® Foamex 825 is a compatible defoamer emulsion based on polyether siloxane technology. Good balance of effectiveness and compatibility.

EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDDA)(1) and tripropylene glycol diacrylate (TPGDA) . EBECRYL 745 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates.

EBECRYL® LEO 10502 is a low viscosity polymeric tetrafunctional polyether acrylate that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10502 is recommended for use in low odor and low migrating UV/EB curable overprint varnishes (OPV’s) and inks.

EBECRYL® 3700-20T is the bisphenol A epoxy diacrylate, EBECRYL 3700, diluted 20% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1), to provide a lower viscosity, easier handling product. EBECRYL 3700- 20T exhibits very fast cure response and low odor. Films of EBECRYL® 3700-20T cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, scratch resistance, and excellent chemical resistance.

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.