Products

DERCOLYTE® S 115 is produced from the polymerisation of beta pinene. Is a tackifying resin recommended to improve the adhesive properties (tack, adhesion) of solvent based adhesive formulations, particularly in pressure sensitive adhesives (PSA).

Synthomer ADS H206 is a low molecular weight, solid polyvinyl acetate. It is designed for use in solvent based coatings, inks and adhesives or melt extrusion systems.

EVATANE® 42-60 is a random ethylene-vinyl acetate copolymer.

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

HYDROGRAL® G is a glycerol ester of partially hydrogenated rosin. It is specially recommended to improve oxidation resistance and long-term adhesive performances of adhesives such as insulation sealants or pressure sensitive adhesives.

REAGEM® 5006 is a tackfier resin based on hydroxylated polyester. It helps improve the wet tack and peel-build performance of reactive polyurethane-based adhesive.

HIKOTACK® P-120 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for the paint and ink products, tackfier for solvent based adhesive (CR Adhesive), water repellent agent, concrete curing agent, and binder for asphalt.

Synthomer M40 is a medium molecular weight, solid polyvinyl acetate. It is designed for use in solvent-based coatings, inks, and adhesives or melt extrusion systems. Synthomer M40 can also be used as a low-profile additive in unsaturated polyester composites, typically pultrusion and bulk molding compound processes.

Foral® 85 is the glycerol ester of hydrogenated wood rosin. It is an exceptionally pale thermoplastic resin that has outstanding resistance to oxidation and to diskoloration caused by heat and aging. Foral® 85 resin can be used as a tackifier resin in various types of adhesives, and in protective and barrier type coatings that require an exceptional degree of color retention and oxidation resistance. It is particularly effective in tackifying acrylic PSA formulations.

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.

SUKOREZ® NX-710 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as metallocene catalyzed polyolefin(me-PO), ethylene vinyl acetate(EVA), styrene block copolymer(SBC) and amorphous polyalphaolefin(APAO).

SUKOREZ® SU-110 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

Staybelite® Ester 10 is the glycerol ester of partially hydrogenated gum rosin. It is a pale, thermoplastic resin with excellent resistance to oxidation and discoloration. It is recommended for use as a tackifying resin for many adhesive applications, particularly pressure sensitive and emulsion types. In general, it is useful where there is need for pale, non-oxidizing, and color stable resin.

DERTOPHENE® 1510 is a high softening point terpene phenolic resin with high polarity. Thanks to its excellent compatibility with chloroprene and acrylics, this resin improves adhesion, peel strength by preserving outstanding cohesive balance.

Synthomer ADS H190 is a medium to high molecular weight, solid polyvinyl acetate. It is and adhesives or met designed for use in solvent based coatings, inks extrusion systems. profile additive in Synthomer ADS H190 can also be used as a low unsaturated polyester processes. composites, typically pultrusion and BMC processses