Products

CYMEL® U-80 Resin is a highly n-butylated urea resin supplied at >96% solids content. Its high extent of alkylation and hydrophobic nature make the CYMEL® U-80 Resin suitable for a wide range of coating applications, including high solids primers for automotive, general industrial, and container coatings, providing improved film flexibility and adhesion to various substrates. CYMEL® U-80 resin is insoluble in water but can be used in emulsified form as a crosslinking agent in water-dispersible alkyds, acrylic resins, and in emulsion systems.

CYMEL® 27-802 resin is a general purpose partially n-butylated melamine resin supplied in a mixture of n-butanol and xylene . CYMEL® 27-802 combines fast curing speed with good resistance properties making it suitable for a wide variety of industrial bake finishes including decorative metal coatings

TERSPERSE® 2510 is a nonionic block copolymer, polymeric surfactant.

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

CYMEL® U-1050-10 Resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPS compliant version of CYMEL® U-1050-10 Resin. CYMEL® U-1050-10 Resin has wide compatibility with other film formers and is useful in fast curing industrial baking finishes and low temperature curing conversion varnishes for wood.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

TERSPERSE® 2520 can be used to prepare concentrated emulsions and dispersions containing pesticide actives. The recommended dose rate is up to 10% of the overall formulation volume. The dispersant is soluble in aliphatic and aromatic hydrocarbons and esters and insoluble in water, alcohols and glycols.

CYMEL® 1130 resin is a methylated/n-butylated melamine crosslinker with a high extent of alkylation. Its hydrophobic nature makes for improved wetting and adhesion on metal substrates, and improved humidity and salt spray resistance. CYMEL® 1130 resin is insoluble in water but shows excellent compatibility and stability with water-soluble backbone polymers and is an excellent crosslinker for anodic electrodeposition coatings.

CYMEL® 304 Resin is a specially alkylated, high solids melamine crosslinking agent designed specifically for industrial wood coating applications. Systems formulated with CYMEL® 304 Resin exhibit excellent catalyzed stability and films develop excellent early hardness, resistance properties, appearance, and cold check resistance. It has very low free formaldehyde and low evolved formaldehyde on cure relative to conventional urea-based formulas.

CYMEL® 300 Resin is a highly methylated melamine crosslinking agent and is the purest form of hexa(methoxymethyl)melamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYMEL® 300 resin an excellent crosslinker for applications where film flexibility is a premium, such as required in some coil and can coatings.

CYMEL® 202 Resin is a methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature combined with high reactivity, high solids content, and rather low formaldehyde release during the curing process makes CYMEL® 202 Resin suitable for a wide range of medium to high solids or waterborne baking applications, like can and container coating formulations, automotive coatings, and low cure systems to improve film appearance and resistance properties. CYMEL® 202 resin has a high tendency to self-condense at rather low baking temperatures, providing films with very good hardness, gloss, chemical resistance, and outdoor durability.

EBECRYL® 4587 is a solvent-free, water emulsifiable aliphatic urethane acrylate, for use in ultraviolet (UV) and electron beam (EB) curable coatings

Additin® RC 2516 is a deactivated, medium active, light colored, low odor, high viscosity sulfur carrier with good solubility even in nonpolar base oils. Due to its excellent polarity and lubricity in combination with a controlled sulfur activity, it is particularly suited for manufacturing metalworking fluids for medium to heavy duty stamping, fine blanking and metal forming processes. The low copper corrosivity makes it also suitable for machining yellow metal alloys. It is also highly recommended for the formulation of EP greases, slideway oils and industrial gear oils.