Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- CI Name
- CI Number
- Chemical Family
- Chemical Name
- Function
- Pigment
- Pigment Type
- Plastics & Elastomers Functions
- Product Code
- MITM13756
- Single Ingredient
- Yes
- Synonyms
- CI 20735
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Coating End Applications
- Compatible Polymers & Resins
- Ink & Toner End Applications
- Markets
- Applications
Properties
- Color (Properties)
- Physical Form
- Notes
- Fastness to Solvents: colouring of solvent after 24 h at 20 °C according to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one
- Fastness to Reagents: colouring of reagents after 24 h at 20 °C according to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one
- Light Fastness - Xenotest: determined by ČSN EN ISO 105-B02: 2000 (80 0147) and evaluated in 1/3 and 1/1 of standard depth and in full shade; determined according to blue scale, by it degree 1 denotes the lowest fastness, degree 8 the highest one
- Weathering Fastness - Xenotest: determined by ČSN EN ISO 105-B04: 1998 (80 0171) and evaluated in 1/3 and 1/1 of standard depth and in full shade;
- determined according to grey scale, by it degree 1 denotes the lowest fastness, degree 5 the highest one
- Overspray Fastness: assessment of bleeding into a white nitrocellulose combination lacquer for 60 min. at 70 °C against ISO grey scale; by it degree 1 denotes the lowest fastness, degree 5 the highest one
- Heat Resistance: the values quoted indicate up to what temperature the pigments do not significantly alter; these are guide values which can be influenced by the binder used and the period of exposure to high temperature
- Migration Fastness: assessment of bleeding into a white polyvinylchloride sheet for 24 h at 70 °C against ISO grey scale; by it degree 1 denotes the lowest fastness, degree 5 the highest one; no data means that the pigment is not recommended for dyeing of PVC
- Fastness to plasticizers: colouring of plasticizer (diethylhexylterephthalate) after 24 h at 20 °C acording to ISO grey scale is determined; degree 1 denotes the lowest fastness, degree 5 the highest one
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002261
- Principal
Other
- Color (SDS)
- Red
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Substance does not meet the criteria for PBT or vPvB ccording to Regulation (EC) No 1907/2006, Annex XIII.
- USA/DOT UN Number
- Not Applicable
- Thermal Properties
Value Units Test Method / Conditions Thermal Stability 280.0 °C plastics - Shelf Life & Stability
Value Units Test Method / Conditions Chemical Fastness (Acetone) 4.0-5.0 - Chemical Fastness (Butyl Acetate) 4.0-5.0 - Chemical Fastness (Ethanol) 5.0 - Chemical Fastness (Linseed Oil) 5.0 - Chemical Fastness (Water) 5.0 - Gray Scale Chemical Fastness (White Spirit) 5.0 - Chemical Fastness (Xylene) 4.0-5.0 - Light Fastness 7.0-8.0 - Light Fastness 7.0-8.0 - Light Fastness 7.0-8.0 - Migration Fastness 4.0-5.0 - Shelf Life 48.0 mo Weathering Fastness 4.0 - EN ISO 105-B04: 1998 Weathering Fastness 3.0-4.0 - EN ISO 105-B04: 1998 Weathering Fastness 4.0-5.0 - Overspray - Physical Properties
Value Units Test Method / Conditions Bulk Volume 6.3 L/kg Density 1.5 g/cm³ DIN EN ISO 787-10 Oil Absorption 78.0 ml/100 g DIN EN ISO 787-5 - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 390.0 °C Flash Point (SDS) 390.0 °C Lower Explosive Limit (SDS) 80.0 g/m³ Melting Point (SDS) min. 310.0 °C Solubility In Water (SDS) 11.2 μg/L at 26°C Specific Gravity (SDS) 1.5 - pH (SDS) 5.5-8.5 - at 20°C, 100 g/l water solution