Products

CIMBAR XF functions as a filler and pigment in plastics and elastomers.

Baerolub® OP-15 is a prill oxidized low density polyethylene wax.

ISOCARB 24 are primary saturated carboxylic acids with defined branching of the carbon chain. These products are derived from the oxidation of Guerbet alcohols and are available with even numbered carbon chain lengths of 12 to 32.

POLYGLYKOL B 01/10 is a dispersant and solvent used in chemical manufacturing, equipment and parts, fluids and lubricants, leather manufacturing, metal manufacturing and finishing, paints and coatings, printing and inks, and textile manufacturing. It is applied in metal processing and used as a base stock and oil, lubricating agent in metalworking fluids. Additionally, it functions as a lubricant and solvent in industrial additives.

AEROXIDE® TiO2 P 90 is a highly dispersed titanium dioxide manufactured according to the aerosil process.

Superior Graphite 2922 is a purified flake product manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes the flake graphite to extremely high temperatures so that impurities, including inorganic contaminants, are sublimed. Superior Graphite 2922 is the medium-coarse size grade of the 'Thermally Purified Flake' product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are increase in thermal and electrical conductivity, coefficient of friction reduction, and low gas diffusion property enhancement in high demanding applications.

NACOL 22-98 Alcohol are single fractions of linear, primary, oleochemical based fatty alcohols with even numbered carbon chain lengths ranging from C6 to C22.

CARPOL® MX-425 is a Mannich-based polyether polyol. The resulting product has a nominal functionality of approximately four and a targeted hydroxyl number of 425. The presence of amine in this polyol creates a material that is autocatalytic. Due to this, CARPOL® MX-425 is suitable for spray foam formulations in addition to any other application that demands a fast cure.

CARPOL® SP-477 is a sucrose-initiated polyether polyol. The high functionality of the initiator yields a resultant polyol with a nominal functionality of five and a typical hydroxyl value of 470. Due to this polyol’s functionality, its niche is rigid foam and its applications. Blending this polyol with other polyether polyols allows for foam systems with high to low degrees of crosslinking. In addition, CARPOL® SP-477 is a neutral material, which presents the formulator with complete catalytic control over a system.

Toyal 5263 is aspherical Aluminum Powder produced by inert gas atomization.

POLYGLYKOL B 01/40 is a dispersant and solvent used in chemical manufacturing, equipment and parts, fluids and lubricants, leather manufacturing, metal manufacturing and finishing, paints and coatings, printing and inks, and textile manufacturing. It is applied in metal processing and used in metalworking fluids as a base stock and oil, lubricating agent, and solvent. Additionally, it functions as a lubricant and solvent in industrial additives.

3M™ Boron Nitride Cooling Filler Platelets 012 P is a powders of highly crystalline boron nitride single platelets. Particle mean size ranges from 0.5 to 14 μm.

P-™10 Fatty Acids derived from pure castor oil. P-™10 Fatty Acids is the building block for modifying many performance properties of a broad range of industrial chemicals. These performance enhanced chemicals are then used in a variety of consumer products, including paints, adhesives, soaps and inks.

CARPOL® PGP-400-50 is a propylene glycol-initiated polyether polyol. The resulting material has a nominal functionality of two and a molecular weight of 400 Da. The low functionality and viscosity of this polyol makes for a versatile product. It may be used in rigid foam systems to lower the viscosity of B-side materials while helping control crosslinking.

3M™ Glass Bubbles S38 is specially formulated for a high strength-to-weight ratio. This allows greater survivability under many demanding processing conditions, such as injection molding. They also produce stable voids, which results in low thermal conductivity and a low dielectric constant. 3M glass bubbles are available in a variety of sizes and grades to help you meet your product and processing requirements.