Products

Hybricor™ 204 is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr⁶⁺ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (20 micron) applications. It does not affect pot life of 2K systems.

TEGO® VariPlus AP improvesgloss and adhesion on various metals (e.g. steel, aluminium). As a solvent-freeco-binder, it is recommended for high-solid industrial coatings and for UV-offset inks.

CYMEL® 370 Resin is a partially methylated melamine crosslinker supplied in iso butanol. Like other high imino resins, CYMEL® 370 Resin is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 Resin suitable for a wide range of solventborne and waterborne industrial bake formulations.

TEGO® Wet 260 is a highly active siloxane-based substrate wetting additive recommended for water borne coatings. It shows very good substrate wetting properties and is recommended for fine atomization for spray application. It is very compatible.

CARBOWET® 106 is a non-ionic wetting additive that provides additional dispersing properties. Wets all kinds of pigments. Was designed as alternative to APEs with a HLB-value around 11.

UCECOAT® 7856 is a new high-solids and solvent-free radiation curable polyurethane dispersion in water suitable for high gloss applications with excellent clarity and distinctness of image (DOI). The product has an excellent colloidal stability (shelf life of 12 months) and complies with VOC-free, tin-free Does not contain intentionally added organic tin compounds and stenomer Chemically well-defined monomeric or multi functional acrylates, with low molecular weight and very narrow molecular weight distribution free requirements. Due to its low viscosity and its good responsiveness to rheology modifiers, it can be easily applied by spray, roller or curtain coating operation. The product can be advantageously applied in one single coat and does not require sanding, although it can still benefit from polishing. The cured coating exhibits good chemical and scratch resistance required for high-end wooden furniture topcoats, though it is also suitable for other substrates and applications.

D.E.R.® 662 is used in can coating, coil coating, and powder coating applications. It functions as a binder and resin in CASE ingredients.

Bayferrox® 511 is an iron oxide red pigment used primarily in building materials such as plasters, coatings, and roofing tiles. It offers excellent durability, UV protection, and color consistency in various applications. This pigment is commonly used in the construction and coatings industries for decorative finishes.

BONDERITE® S-FN M 254N is one of a series of Henkel’s Acheson resin- bonded lubricant coatings designed to provide dry film lubrication in a variety of industrial, consumer and military applications. BONDERITE® S-FN M 254N is a synergistic combination of MoS2 and other lubricants dispersed in an epoxy resin solution. BONDERITE® S-FN M 254N can be applied by standard brush, dip-spin, or spray techniques. BONDERITE® S-FN M 254N provides lifetime lubrication and good corrosion resistance for components which are inaccessible after assembly, but nevertheless must continue to function reliably. BONDERITE® S-FN M 254N provides an effective performance, even as a very thin film (0.0003 inch or 8 microns), thus there is little interference with operating tolerances.

TEGO® Glide 440 has very good slip and anti-crater properties. It can be used in a broad range of different coatings.

AEROSIL® R 816 is a fumed silica after-treated with hexadecylsilane.

HP7279-Medium Oil Alkyd is a chain-stopped medium oil alkyd resin that is based on a blend of semi drying and drying oils. It is dissolved in Aromatic 100 for use in applications that require higher flashpoints.

KRONOS® RP-11 SLURRY is an inorganic titanium dioxide pigment used in architectural paint coatings.

D.E.R.® 6224 is a low molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 6224 Epoxy Resin is designed for decorative powder coating applications requiring excellent flow and gloss. The low melt viscosity and fast reactivity of D.E.R. 6224 Resin make this resin particularly suitable for the formulation of hybrid powder coatings. Improved flow and surface finish can be obtained when using D.E.R.® 6224 Solid Epoxy Resin in combination with polyester resins using polyester to epoxy ratios from 50/50 up to 80/20 parts by weight. The resin can also be used alone with conventional curing agents for pure epoxy powder coatings.

TEGO® Rad 2250 (Germany) is a broadly usable radically cross-linkable slip agent for clear coats. It provides efficient wetting, slip, and flow combined with very good compatibility.