Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Code
- MITM04871
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Advantages
- Good adhesion to metals
- Low coefficient of friction
- Good wear life (resistance to fretting and galling)
- Corrosion resistance
- Resistance to many chemicals and solvents
Applications & Uses
- Application Area
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Markets
- Applications
- Application and Usage Information
- Product Application:
- .Construction Equipment
- Cold-Heading Machinery
- Business Machines
- Threaded Connections
- Jet Engine Parts
- Farm Machinery
- Woodworking Equipment
- Aircraft Fasteners
- Mining Equipment
- High Tension Nuts and Bolts
- Safety Equipment
- Usage Information:
- Surface Preparation
- The performance obtained by a coating of BONDERITE® S-FN M 254N depends on the care given to substrate preparation, application, and curing. The following pretreatments are recommended:
- Steel: Grit or vapor blast, degrease and chemically pretreat with treat with Bonderite M-ZN 20 (know as Granodine 20), Bonderite M-MN 2 (known as Lubrite 2), or equivalent
- Stainless Steel: Grit or vapor blast, degrease.
- Aluminum: Degrease or solvent clean and pretreat with Bonderite M-CR 1200S (known as Alodine 1200S). Coating may also be applied over anodized surface.
- Copper Alloys: Degrease or solvent clean, grit blast, or chemically pretreat .
- The performance obtained by a coating of BONDERITE® S-FN M 254N depends on the care given to substrate preparation, application, and curing. The following pretreatments are recommended:
- Mixing
- BONDERITE® S-FN M 254N lubricant is supplied as a one-component concentrate at a solids concentration of 55 percent. Dilution depends on the method of application to be used and the coating thickness desired. A 1:1 blend of toluene and MEK (methyl ethyl ketone) can be used as a diluent. Mixing is best accomplished by mechanical agitation.
- Application
- BONDERITE® S-FN M 254N may be applied by spray, dip-spin, or brush methods according to individual application requirements.
- For spray application, external atomizing type spray guns are recommended
- Adjust the spray gun to provide a well-atomized spray at 25 to 40 psi (1.8 to 2.8 kg/sq cm) air pressure. For maximum corrosion resistance, apply multiple thin coats with a ten-minute air dry period between coats to minimize pin holes. Oven curing is required only after the final coat of lubricant is applied.
- Note: It is recommended that an agitator-type spray cup be used to maintain product suspension.
- Curing
- A normal cure schedule is a cure of 60 minutes at 149°C. However, performance may be improved with a cure of 60 minutes at 204°C. For example, this cure cycle increases the Falex endurance life.
- Surface Preparation
- Product Application:
Properties
- Physical Form
Packaging & Availability
Principal Information
- Group Principal Number
- S000218
- Principal
Storage & Handling
- Storage and Shelf Life Information
- Shelf life for this product is 2 years from date of qualification under original seal. Keep container tightly closed when not in use. Store in a cool, well ventilated area. Empty containers may retain hazardous properties.
Other
- Color
- Dark gray
- Color (SDS)
- Black
- IATA/ICAO Proper Shipping Name
- Paint
- IATA/ICAO UN Number
- UN 1263
- IMO/IMDG Proper Shipping Name
- Paint (lead phosphite dibasic)
- IMO/IMDG Segregation Group
- 9 - Lead and its compounds
- IMO/IMDG UN Number
- UN 1263
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Aromatic
- USA/DOT Proper Shipping Name
- Paint
- USA/DOT UN Number
- UN1263
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 2.0 yr yr - Mechanical Properties
Value Units Test Method / Conditions Coefficient of Friction 0.14 - as static - Physical Properties
Value Units Test Method / Conditions Density 11.2 lb/gal lb/gal Flash Point 4.0 °C °C - Material Composition
Value Units Test Method / Conditions Volatile Organic Compounds (VOC) 5.0 lb/gal lb/gal dehydrated - Application Information
Value Units Test Method / Conditions Application Temperature 149.0 °C °C Application Temperature 135.0 °C °C continuous - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) min. 272.0 °C °C Boiling Point (SDS) min. 79.0 °C °C Flash Point (SDS) -4.4 °C °C Closed Cup Lower Explosive Limit (SDS) 1.2 % % Melting Point (SDS) -89.0 °C °C Odor Threshold (SDS) 2.14 ppm ppm Relative Vapor Density (SDS) 3.2 - Specific Gravity (SDS) 1.34 - Upper Explosion Limit (SDS) 11.5 % % Vapor Pressure (SDS) 91.0 mm Hg mm Hg Viscosity (SDS) 200.0-1000.0 cPs cPs Volatile Organic Content (VOC) (SDS) 616.0 g/L g/L