Products

TEGO® Wet 251 is a highly active siloxane-based substrate wetting additive. It shows good substrate wetting properties and is suitable for a broad range of coatings. Is is very compatible and recoatable.

ACEMATT® 3600 is a fine particle sized specially after-treated precipitated silica, ideal for UV-coatings. It is particularly suitable for matting very thin or very thick UV-coating films.

TEGO® AddBond LP 1600 improves adhesion and flexibility of solvent borne coatings on metal and plastic. It is solvent-free and highly suitable for high-solids coating systems.

AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxidein the ratio of 5:1.

SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any film defects.

EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings.

Vesmody® U505 is a nonionic urethane rheology modifier, a suitable thickening agent for any waterborne painting system, especially for architectural coating, industry coating, Wood coatings as well as water-based ink. Vesmody U505 is a high solid content and efficient high-medium shear PU thickener, it allows the formulation of paints with an excellent balance between flow and sag. Vesmody U505 has a rapid thickening response and provides the system excellent flow and leveling.

CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

D.E.R.® 671-X75 is a low molecular weight epoxy resin solution in xylene.

EBECRYL® 3730-TP25 is the modified diacrylate ester of a bisphenol A based epoxy resin diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1). It is designed primarily for use in ultraviolet light (UV) or electron beam (EB) curable formulations. EBECRYL® 3730-TP25 is light in color with high UV/EB reactivity, and exhibits good wetting of pigments, matting agents and substrates compared to unmodified epoxy acrylates. Cured films based on EBECRYL® 3730-TP25 will typically demonstrate high gloss and hardness, and good chemical resistance.

Dynasylan® MTES, an alkyltrialkoxysilane is an important component in sol­gel systems. Dynasylan® MTES is a colorless, low­viscosity liquid. Use requires acid­ or alkali­catalysed hydrolysis. Dynasylan® MTES is regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally Dynasylan® MTES contains a methyl group that adds organic character to the products. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (­Si­O­Si­). Condensation occurs parallel to hydrolysis once a certain amount of silanol groups have been formed. The absolute and relative rates of hydrolysis and condensation depends on a number of factors. The most important factors include pH, concentration, solvent, temperature and the catalyst.

TEGO® Foamex 800 is a very compatible defoamer emulsion based on polyether siloxane technology. Very easy to incorporate.

D.E.H.® 4909 Epoxy Curing Agent is a modified polyamine based curing agent for epoxy resins.

Bayferrox® 511 is an iron oxide red pigment used primarily in building materials such as plasters, coatings, and roofing tiles. It offers excellent durability, UV protection, and color consistency in various applications. This pigment is commonly used in the construction and coatings industries for decorative finishes.

CYMEL® 300 Resin is a highly methylated melamine crosslinking agent and is the purest form of hexa(methoxymethyl)melamine available in our product line. Its high degree of alkylation coupled with its high monomer content makes CYMEL® 300 resin an excellent crosslinker for applications where film flexibility is a premium, such as required in some coil and can coatings.