Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM16008
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Ink & Toner End Applications
- Markets
- Applications
- Product Uses
Vesmody® U505 is supplied as a pourable and pumpable liquid, it is easy to use and can be added in any formulation time directly after dilution. Depending on the character and amount of the emulsion as well as filler and pigment, the amount of the addition is variable, probably 0.1-2.0% by weight of the formulation in its supplied form. The exact amount required in each formulation should be determined by pre-trials.
Properties
- Physical Form
Technical Details & Test Data
- Product Properties
- Tin-free, Apeo free
- Excellent high-medium shear viscosity thickening efficiency
- Excellent water and alkaliresistance
- Excellent leveling and sag resistance
- Use over a wide pH range
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002918
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
- The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight.
- The validity of this product is for 12 months, performance assessment is recommended before use after shelf life.
- The product should be protected from freezing during storage. After opening the packing, suggested to use up one time.
Other
- Appearance
- Translucent to slightly milky-white liquid
- Appearance (SDS)
- Clear to opaque liquid
- Item Number
- Miscible in (SDS)
- Water
- Odor (SDS)
- Faint odor
- Other Hazards
- Not available
- USA/DOT Proper Shipping Name
- Not applicable
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Biocide Content 10.0 ppm ppm pH 6.0-9.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Density 0.99-1.09 g/cm³ g/cm³ GB/T 4472 at 25°C Viscosity 3000.0-8000.0 mPa.s mPa.s Brookfield Viscometer at 25°C, 30 rpm, spindle #5 - Material Composition
Value Units Test Method / Conditions Methylisothiazolinone Content 200.0 ppm ppm Solid Content 39.0-41.0 % % Internal Method at 150°C, 4 cm, 20 minutes - Application Information
Value Units Test Method / Conditions Dosage (Use Level) 1.0-2.0 % % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Initial Boiling Point (SDS) approx. 100.0 °C °C Water Relative Density (SDS) 1.04-1.05 - at 20°C, Water = 1 Viscosity (SDS) 3.0-8.0 Pa.s Pa.s at 25°C Viscosity (SDS) 3.0-8.0 Pa.s Pa.s at 25°C, Dynamic pH (SDS) 6.0-7.0 -