Products

D.E.H.® 591 specifically designed for high chemical resistance applications.

CYMEL® 327 resin is a methylated high imino melamine crosslinker supplied in isobutanol. CYMEL® 327 resin is very reactive and has a tendency towards selfcondensation at normal baking temperatures, providing films with very good hardness, gloss, chemical resistance and outdoor durability. Its major advantage relative to other high imino resins is its potential to lower VOC in high solids formulations.

AP1028 is medium viscosity, reactive, phenalkamine hardener for epoxy resin based lacquers and coatings.

PARALOID™ XR-34 Resin is an effective pigment dispersant. They may also be blended with alkyds or nitrocellulose to improve the drying speed, gasoline resistance, and durability characteristics of the coating. They also provide significant upgrades to the gloss and hardness of other acrylic resins and other film formers when used as the grinding medium. PARALOID XR-34 is a slightly harder resin than PARALOID B-99. PARALOID B-99 resin is supplied at 50% solids in a toluene/xylene mixture. It is also available as a solid grade PARALOID B-99N. PARALOID XR-34 resin is supplied at 50% solids in xylene.

D.E.H.® 582 cycloaliphatic amine hardener is used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. It has low color and good light stability, offers good low-temperature cure and can also be used as an accelerator for other hardeners. It has excellent adhesion to wood, metal, fiber-glass and concrete and is suitable for construction and civil engineering applications.

EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.

Dynasylan® 6498 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and ethoxy groups. Dynasylan® 6498 is a colorless, nearly odorless low ­viscosity liquid. Dynasylan® 6498 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE).

WANNATE® HB-200 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

EBECRYL® 8110 is a novel(1) energy curable specialty resin developed to enhance coatings with long lasting easy-to-clean (E2C) surface property. Coatings based on EBECRYL 8110 cured by ultraviolet light (UV) or electron beam (EB) exhibit oil and water repellent effect (high contact angle) and easy removal of fingerprints, oils, dust and other contaminants from coatings surfaces.

PARALOID™ B-82 51% Resin is a softer, general purpose acrylic resin. Films based on PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) exhibit the water-white color, durability, flexibility and chemical resistance characteristic of acrylic polymers. PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) is well suited for general product finishing where a softer resin is required. It can be used over metal, plastics, wood and masonry.

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

CYMEL® 1172 resin is an unalkylated glycoluril crosslinker supplied in water at 45% solids. It is designed to be used for crosslinking aqueous neutral or acidic hydroxyl or amide functional polymers and combines excellent stability at acidic pH (as low as 4) with excellent reactivity. CYMEL® 1172 resin cannot be used in amine neutralized or basic coating systems because of the potential problems of demethylolation of the compound and a significant decrease in cure response.

PARALOID™ AU-608B are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

EBECRYL® 4859 is a difunctional aliphatic urethane methacrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL 4859.) Due to a low intrinsic viscosity, EBECRYL 4859 offers ease of formulating in energy curable systems that are low in viscosity with high oligomer content. Films of EBECRYL 4859 cured by ultraviolet light (UV) or electron beam (EB) exhibit good hardness, optically clarity, low color and good impact resistance.

EBECRYL® 3418 is a modified bisphenol A epoxy diacrylate that exhibits excellent reactivity and reduced viscosity. Films of EBECRYL® 3418 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high flexibility, gloss, toughness, adhesion and superior chemical and scratch resistance.