EBECRYL® 8110

EBECRYL 8110 is characterized by: Low viscosity

UV/EB cured coatings containing approx. 25 % EBECRYL 8110 (recommended concentration) are characterized by the following performance properties:

• Easy-to-clean fingerprint without smudge,
• Outstanding resistance to mechanical wear,
• Unique long lasting E2C surface effect,
• Oil and water repellent – low surface energy,
• Excellent chemical resistance
• Resistance to permanent oil markers & inks

Formulated UV/EB curable products containing EBECRYL 8110 may be applied via direct or reverse roll, offset gravure, metering rod/bar coater, slot die, knife over roll, air knife, curtain, immersion, spray, roll to roll and spin coating methods, as well as screen printing.

EBECRYL 8110 is recommended for use in:

• Consumer electronics (casing & display)
• Optical film
• Display partitions & color resist
• Luxury packaging,
• Consumer goods
• High gloss & metallic finishes

• The formulated coating containing EBECRYL 8110 may exhibit some slight haze which is typically not visible hen applied as a coating and cured.
• If the cured coating containing EBECRYL 8110 does exhibit haze, it is recommended the level of EBECRYL 8110 be adjusted and/or NPG(PO)2DA (neopentyl glycol propoxylate diacrylate) be added to the formulation

• Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
• This might cause uncontrollable polymerization of the product with the generation of heat.
• Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
• Procedures that remove or displace oxygen from the material should be avoided.
• Do not store this material under an oxygen free atmosphere.
• Dry air is recommended to displace material removed from the container.
• Wash thoroughly after handling.
• Keep container tightly closed.
• Use with adequate ventilation.